xTool Academy · Laser engraving basics
Laser Engraving: How It Works and How to Do It
Click the diagram to see what each part of a laser engraver does, then follow the six-step process to make your first engraving.
Updated November 11, 2026
What is laser engraving? Laser engraving uses a focused beam of light to remove or change a thin layer of material, leaving a permanent mark without touching the surface. The laser follows a digital design, so the same machine can engrave a name on a pen, a photo on wood or a logo on a steel tumbler.
The laser scans back and forth line by line, like a printer, firing where the image is dark. Used for filled areas, text and photos.
The laser follows the outline of a shape, like a pen. Used for thin lines, scoring and cutting parts out.
How Does Laser Engraving Work?
- Laser source
Creates the beam. Its wavelength decides which materials it can mark: blue diode light for wood and leather, CO2 for wood, acrylic and glass, and 1064 nm fiber or IR light for metal.
- Mirrors or galvo
Steers the beam. On a gantry machine, mirrors ride on rails across the bed. On a galvo machine, two fast-moving mirrors swing the beam, which is much faster on small items.
- Focus lens
Concentrates the beam into a spot a fraction of a millimeter wide. The material must sit at the focal distance; out of focus, lines get wide and weak.
- Material
Absorbs the energy and either vaporizes (engraving), melts (etching) or changes color (marking). Darker, matte surfaces absorb more; shiny metals reflect most light.
- Air assist
A jet of air at the nozzle blows smoke and debris away from the cut, which keeps engravings cleaner and reduces flare-ups.
- Exhaust and filter
Pulls smoke and fumes out of the machine through a vent or an air purifier. Every laser needs it; some materials give off harmful fumes.
Types of Laser Engraving
"Laser engraving" covers several results. They come from the same machine with different power, speed and passes.
Engraving
Vaporizes material to leave a cavity you can feel. Deep and durable.
Etching
Melts the surface so it rises and roughens. Faster and shallower than engraving; the main difference in laser engraving vs etching is depth.
Marking
Changes the surface color with almost no depth, as with black marks on stainless steel.
Deep and 3D engraving
Many passes or grayscale power changes carve relief you can see from the side. See 3D laser engraving.
Color engraving
MOPA lasers build colored oxide layers on stainless steel and titanium. See color laser engraving.
Photo engraving
Dithering turns a photo into fine dots the laser can burn. See photo laser engraving.
Which Laser Engraver for Which Material
The laser source matters more than wattage: each wavelength suits different materials. Browse all xTool laser engravers, or compare picks in our guide to the best laser engraver.
| Laser type | Best materials | Limits | xTool examples |
|---|---|---|---|
| Diode (blue, 10–40W) | Wood, leather, cardboard, slate, dark acrylic, coated metal | No clear acrylic; bare metal only with marking spray | M2, S1 |
| IR (1064 nm module) | Bare metal marking, plastics | Light marks; low power | F2 |
| CO2 (40–80W) | Wood, acrylic (including clear), leather, glass, paper, fabric | Bare metal only with marking spray | X1, P3 |
| Fiber / MOPA | Stainless steel, aluminum, brass, gold, silver, titanium; color with MOPA | Not for wood cutting or clear materials | F2 Ultra |
| UV (355 nm) | Glass, crystal, plastics, fine detail on almost anything | Marking only, no cutting | F2 Ultra UV |
What Materials Can You Laser Engrave?
The most popular laser engraving materials are wood, metal, leather, glass, acrylic and rubber. Match the material to the laser type above, and always check what a plastic is made of before you engrave it.

Wood
High contrast on light woods like maple and basswood. See wood laser engraving.

Metal
Needs fiber, MOPA or IR, or marking spray. See how to engrave metal.

Leather
Natural, vegetable-tanned leather engraves cleanly; avoid chrome-tanned and faux leather.

Glass
CO2 frosts glass; UV marks it cleanly with less risk of chipping.

Acrylic
Cast acrylic engraves frosty white; clear acrylic needs CO2 or UV.

Rubber and stamps
Laser-safe rubber makes custom stamps; check it is not PVC-based.
Never laser engrave these
- PVC and vinyl (release chlorine gas)
- Polycarbonate (Lexan): burns and discolors
- ABS: melts and gives off toxic fumes
- PTFE (Teflon) and fiberglass
- Coated carbon fiber
- HDPE and polystyrene foam: melt and catch fire
How to Use a Laser Engraver, Step by Step
Laser engraving for beginners comes down to six steps. Click a step, or follow them in order for your first project.
Step 1 of 6 · Design
Prepare your design
Use vector files (SVG, DXF, AI) for text, lines and cutting, and bitmaps (PNG, JPG) for photos and shaded art. Convert text to paths so fonts do not change, and size the design to your material.
- Free software such as xTool Studio handles design, layout and laser control; compare options in our laser engraving software guide
- For photos, choose a dithering mode or grayscale; high-contrast images engrave best
- Find ready-made files on atomm, xTool's maker community
Step 2 of 6 · Settings
Choose the material settings
Four settings control the result: power (how strong), speed (how fast the head moves), lines per inch or DPI (how dense a raster fill is) and passes (how many times it repeats). Higher power and slower speed go deeper and darker.
- Start from tested settings for your material and machine, such as xTool's Material Lab
- Use raster mode for fills and photos, vector mode for lines and cuts
- Turn air assist on for cutting and for most wood engraving
Step 3 of 6 · Focus
Place the material and focus
Lay the material flat and secure it so it cannot shift. Then focus: use the machine's autofocus or set the lens height with a focus gauge. Frame the job to check the design sits where you want it.
- Use a camera or the framing outline to position the design
- Pin down warped wood with honeycomb pins or magnets
- Use a rotary for tumblers, rings and pens
Step 4 of 6 · Test
Run a test grid
Engrave a small grid on a scrap of the same material, with power increasing in one direction and speed in the other. Pick the square that looks best and use those numbers for the job.
- A 5 × 5 grid of small squares is enough
- Test every new batch of material; woods and coatings vary
- Test both engraving and cutting if you will do both
Step 5 of 6 · Engrave
Start the engraving
Close the lid, turn on the exhaust or purifier and start the job. Stay with the machine the whole time and watch for flare-ups, especially when cutting wood, acrylic or masked material.
- Keep a fire extinguisher within reach
- Wear eye protection rated for your laser if it is not fully enclosed
- Pause and let smoke clear before opening the lid
Step 6 of 6 · Finish
Clean and finish
Let the piece cool, then wipe away residue. On wood, a damp cloth or a melamine sponge lifts smoke stains; on metal, wipe with isopropyl alcohol. Finish with oil, wax or a clear coat to protect the surface.
- To darken a wood engraving, add a pass or fill with paint and sand the surface
- Peel masking tape before cleaning
- Seal items that will be handled or washed
Laser Engraving Terms, Explained
- DPI / LPI
- Dots or lines per inch in a raster engraving. Higher values give finer detail and take longer; 254–500 is common for photos and text.
- Line interval
- The gap between raster lines, the inverse of LPI. Smaller intervals give smoother fills.
- Dithering
- Turns grayscale images into patterns of dots so the laser can reproduce shading.
- Focal length
- The distance from the lens to the point where the beam is sharpest. The material surface should sit here.
- Air assist
- Compressed air at the nozzle that clears smoke and reduces burning and flames.
- Passes
- How many times the laser repeats the job. More passes go deeper without raising power.
- Kerf
- The width of material a laser removes when cutting, usually a fraction of a millimeter.
- Galvo vs gantry
- Galvo machines steer the beam with mirrors for speed on small areas; gantry machines move the head on rails for large beds.
Safety Checklist
Run through this before every job.
Fix Common Problems
Pick what you see to get the likely cause and the fix.
See all 10 problems
| Problem | Cause | Fix |
|---|---|---|
| Engraving is too light | Too little power, too fast, or out of focus | Check focus first, then lower speed or raise power in small steps. |
| Engraving is too dark or burnt | Too much power or too slow; no air assist | Raise speed, lower power, turn on air assist and mask light wood. |
| Edges look blurry or wide | Material is out of focus or the lens is dirty | Refocus on the material surface and clean the lens. |
| Uneven depth across the piece | Warped material or an uneven bed | Flatten and pin the material; check the bed is level. |
| Double lines or ghosting | Loose belts, a loose lens or vibration | Tighten belts and the lens, and put the machine on a solid surface. |
| Design lands in the wrong place | Wrong origin or camera not calibrated | Frame before every job and recalibrate the camera. |
| Laser does not cut through | Not enough power or passes, or poor focus | Add passes, slow down, check focus and use air assist. |
| Flames when cutting | Too slow or no air assist | Raise speed, turn on air assist and never leave the machine. |
| Stripes in filled areas | Line interval too wide or scanning speed too high | Lower the line interval and reduce speed. |
| Smoke stains around the design | Smoke settling on the surface | Use masking tape, air assist and better exhaust; clean with a damp cloth. |
Choosing Your First Laser Engraver
Start with the materials you want to work with, then your budget and space. For a full comparison, see the best laser engraver for beginners.

xTool M2
Compact enclosed diode for crafts, with print-and-cut options. A low-cost first machine.
See xTool M2
xTool F2
Portable diode + IR for wood, leather and light metal marks; fast galvo engraving.
See xTool F2
xTool P3
80W CO2 for engraving and cutting wood and acrylic in volume.
See xTool P3
xTool F2 Ultra
60W MOPA + 40W diode for deep, black and color engraving on metal.
See xTool F2 Ultra
Laser Engraving FAQ
What is laser engraving?
Laser engraving is a process that uses a focused laser beam to remove or change a thin layer of a material's surface, creating a permanent design, text or image without touching the material. A computer controls the laser, so it can reproduce any digital design precisely.
How does laser engraving work?
A laser source creates a beam, mirrors or a galvo steer it, and a lens focuses it to a tiny spot on the material. The energy vaporizes or changes the surface where the design is dark, either line by line (raster) or along outlines (vector).
Is laser engraving hard to learn?
No. Most beginners make a first engraving within an hour of setup. The skill is in preparing files and choosing settings, and running a test grid on scrap material makes that much easier.
Do I need a computer to use a laser engraver?
Usually you design and send jobs from a computer, tablet or phone app. Some machines can run saved files from their own screen or a USB drive, but you still need software to create the design.
How much does laser engraving cost?
Desktop laser engravers start around $500 for compact diode machines and run to several thousand dollars for CO2 and fiber machines. Material cost per piece is often under a few dollars. Compare machines in our guide to the best laser engraver.
What should you not laser engrave?
Never engrave PVC, vinyl, polycarbonate, ABS, PTFE (Teflon), fiberglass or coated carbon fiber. They release toxic or corrosive fumes, melt or catch fire. If you do not know what a plastic is, do not put it in the laser.
Is laser engraving permanent? Does it wear off?
Laser engraving is permanent because it changes or removes the material itself. Deep engravings last indefinitely; very shallow marks on soft or coated surfaces can fade with years of heavy handling.
How deep can laser engraving go?
A single pass usually engraves a fraction of a millimeter. With multiple passes, powerful CO2 or fiber lasers can go several millimeters deep into wood or metal.
What is the difference between laser engraving and laser cutting?
Engraving removes part of the surface; cutting goes all the way through. Most CO2 and diode machines do both by changing power, speed and passes.
Is laser engraving profitable?
It can be: material costs are low and personalized items sell at a premium. Success depends on choosing a niche and pricing for your time. Browse laser engraving ideas that sell, and see how to start a laser engraving business.
