From Stickers to $150K in P3-Driven Product Revenue: How Chris Rodriguez Scales Vehicle Accessories with the xTool P3
Business Snapshot
- The Business: Sicker Fab creates easy-to-install visual modification accessories for vehicles including the Ford Bronco, Land Cruiser, and Tacoma.
- The Production Change: With xTool P3, Chris moved beyond vinyl stickers into an acrylic product line built around cutting, etching, UV printing, and repeat production.
- The Output Gain: For one Ford Bronco accessory, P2 could produce 6 pairs per run. P3 usually produces 12 pairs, and can run up to 18 pairs in one job.
- The Efficiency Gain: Cutting is about 2× faster in Chris’s current workflow, using the Bronco triangle product as the example.
- The Business Result: Products involving P3 have generated approximately $150,000 in year-to-date revenue. One best-selling Ford Bronco accessory has sold 800+ units, with about $67,000 in cumulative sales and around $20,000 in 90-day revenue.
Vehicle customization has always been about making a vehicle feel more personal.
For Chris Rodriguez, owner of Sicker Fab, that started with vinyl stickers. Over time, the business expanded into vinyl printing, acrylic processing, UV printing, and easy-to-install visual modification accessories for vehicles like the Ford Bronco, Land Cruiser, and Tacoma.
But as demand grew, the old workflow started to show its limits. Chris did not just need another laser. He needed a machine that could support repeat production, larger material sheets, cleaner cutting, and real order volume.
That is why he upgraded to xTool P3.
A Vehicle Accessory Business Built on Personalization
Sicker Fab serves vehicle owners who want more than generic parts. Its products help drivers add personal, visual details to vehicles that already carry strong identities, especially enthusiast vehicles like the Ford Bronco.
The business began with vinyl sticker cutting, then expanded into vinyl printing, acrylic processing, and UV printing. That evolution created a broader product system: stickers could still drive traffic and customer interest, while acrylic accessories could open a more dimensional, higher-value product line.
The P3 became a key machine in that next stage. Today, Chris uses it mainly for acrylic cutting and etching, creating blanks that are later UV printed and finished. These P3-made acrylic products now work alongside the original sticker business, helping drive overall product expansion and order growth.
Why the P3 Entered the Shop
Before P3, Chris was already using the xTool P2. But for production work, the limitation was clear: the P2 could hold one material sheet per run, and its slower cutting speed was not enough for repeated product manufacturing at scale.
For a business producing vehicle accessories, that meant more loading, more repeated setup, and more workflow interruption.
P3 gave Chris a more practical production path. Its larger bed, higher power, and ability to process more material in each run made it better suited to the way Sicker Fab was growing.
He did not need to compare a long list of machines. For his workflow, P3 made sense because it gave the business what it was missing: more production capacity.
From Sticker Business to Acrylic Product Line
One standout product is Sicker Fab’s Acrylic Rear Triangle Flags for the Ford Bronco.
The product shows how P3 fits into Chris’s workflow. P3 is used to cut and etch acrylic, creating blanks that can later be UV printed and finished into a ready-to-install vehicle accessory. That means the machine is not only helping make parts. It helps support a repeatable product line.
This Ford Bronco accessory has sold 800+ units. It has generated about $67,000 in cumulative sales, with approximately $20,000 in revenue within a 90-day period.
For a business that started with stickers, that kind of acrylic product line represents a meaningful expansion.
More Output in Every Run
The production difference was immediate.
On P2, Chris could produce 6 pairs in one run. With P3, he usually runs 12 pairs, and can produce up to 18 pairs in a single run.
Cutting is also about 2× faster in his current workflow, using the Bronco triangle product as the example.
That matters because this is not one-off hobby production. This is repeatable product manufacturing. Every saved run, faster cut, and cleaner output affects how many orders the business can fulfill.
In Chris’s case, the P3 helped reduce the friction between demand and delivery. Instead of loading fewer parts, cutting slower, and repeating the same workflow more often, he gained a machine that could support larger batches and faster production rhythm.
A Machine That Paid for Itself
For Chris, P3 became a business investment, not just a new tool.
After production started, the machine paid for itself within a few months. Products where P3 was involved have generated approximately $150,000 in year-to-date revenue.
That makes P3 one of the key machines behind Sicker Fab’s current product growth.
The numbers are important, but the workflow behind them matters just as much. P3 did not create demand from nowhere. It helped Chris build more production capacity around a product customers already wanted.
Built for a Mature Workflow
Chris does not use P3 as a beginner machine or a general experiment tool. He uses it as part of a mature production workflow.
The process is direct: cut and etch acrylic with P3, create blanks, then move into UV printing and finishing. The result is a scalable product line that adds value beyond standard vehicle stickers.
He also values xTool’s integrated software experience. The point-and-click workflow saves time and avoids the need to build production around more complex third-party software. For a shop that already knows what it wants to produce, that simplicity matters.
Scaling What Already Works
Chris’s story shows exactly where P3 fits.
When a business already has a clear product direction, proven customer demand, and a need for repeatable output, the next challenge is production capacity. The question becomes less about whether the idea works, and more about how efficiently the shop can make it again and again.
For Sicker Fab, P3 helped answer that question.
It gave Chris a larger bed, faster cutting, more pieces per run, and a smoother way to support acrylic vehicle accessories at scale. It helped turn a product idea into a production system.
That is the difference between making a few parts and building a product line.
And for Chris Rodriguez, that difference helped move Sicker Fab beyond stickers into a higher-capacity acrylic business powered by P3.
Ready to scale your own product line? Explore xTool P3 and see how it can fit into your production workflow.
For more questions, please join our community to get inspired!
