Metalworking Week. Win 100% Refund!

SAVE UP TO $3,467 & Gifts

Best Laser Engraver for Metal Nameplates and Small Awards

by Lennon Han Updated on November 17, 2026

Answer First

The best laser engraver for metal nameplates and small awards depends on the materials you engrave and how small and precisely placed your text has to be. Choose the xTool F2 for metal nameplates and the xTool F2 Ultra UV for crystal and acrylic awards. If one machine also has to cut acrylic and wood, look at the xTool X1.

  • The F2's 5W infrared laser engraves stainless steel, brass, and anodized aluminum, and its 0.03 mm spot keeps small text clear.
  • The F2 Ultra UV's 5W UV laser engraves detail on acrylic and glass and can engrave inside crystal.
  • The X1's 55W CO₂ laser cuts clear acrylic and wood, and with the 20W Diode Galvo and 30W Fiber added, it also engraves metal nameplates.

Shopping for a laser to engrave nameplates and small awards? Many trophy and personalization shops take a mix of orders, from brass door plates and staff badges to crystal and acrylic awards, so the machine needs to handle more than one material and put every name in the right spot.

To help you find a machine that handles both, we will start with how your materials, text size, and plate size decide the laser you need. Then we compare three xTool laser engravers and cutters, the F2, F2 Ultra UV, and X1, and finish with the kind of shop each one suits.

Laser-engraved metal, wood, acrylic, and crystal awards and medals

3 Things That Decide the Right Laser for Nameplates and Awards

Before you compare machines, check three things in your own orders, starting with the materials, then the text size and placement, then the plate size and batch volume.

What Are Your Plates and Awards Made Of?

The material on each order decides which laser you need. Start with the materials you work with most, whether you cut the pieces yourself or buy ready-made trophy and award blanks, and match each one to a laser type.

  • Bare stainless steel, brass, aluminum, and anodized aluminum nameplates need a 1064 nm infrared laser or a fiber laser.
  • Coated metal plates work with a blue diode laser.
  • Crystal and glass awards are best engraved with a UV laser, the only type that can engrave 3D designs inside them.
  • Cutting clear acrylic award shapes from full sheets takes a CO₂ laser.
  • Wood plaques and award bases can be engraved and cut with either a diode or a CO₂ laser.

In our lineup, the xTool F2 covers metal nameplates and the xTool F2 Ultra UV covers crystal, glass, and acrylic awards. The xTool X1 fits shops that cut clear acrylic and full-size wood plaques and also engrave metal once the 20W Diode Galvo and 30W Fiber are added.

How Small Is Your Text, and Will Every Name Line Up?

Names, titles, and dates on a nameplate are set in small type, and each name in a batch has to sit in the same position, so compare spot size and camera positioning, not just laser power.

  • The smaller the laser spot, the cleaner small letters and thin lines come out.
  • With camera positioning and autofocus, the machine finds each blank plate, then places its name where that plate sits.

All three machines position designs by camera, with a 50MP camera on the xTool F2, dual 48MP cameras on the xTool F2 Ultra UV, and a triple-camera system on the xTool X1.

How Big Are Your Plates, and How Many Do You Run at Once?

Measure the largest plate or award you make against the machine's working area, and if you run batches, check whether the bed holds a full batch in one layout.

  • Small metal nameplates, business cards, and trophy plates fit a compact desktop bed, and an extension rail or conveyor lets you load a whole row.
  • Crystal and acrylic awards depend on the surface engraving area, and on the inner engraving area if you engrave inside crystal.
  • Full-size wood plaques and large acrylic plaques need a machine with a large bed.

Small metal nameplates fit on the xTool F2, crystal and acrylic awards suit the xTool F2 Ultra UV, and full-size wood plaques and large acrylic plaques need the larger bed of the xTool X1.

Fiber, CO₂, Diode, or UV: Which Laser Fits Each Award Material?

Bare metal calls for a 1064 nm infrared or fiber laser, and coated metal and small wood pieces work with a diode laser. Fine detail on crystal, glass, and acrylic surfaces is best done with a UV laser, and 3D designs inside crystal or glass need one, while cutting clear acrylic or full-size wood plaques requires a CO₂ laser. Find the job you take on most in the first column, then read across to the laser type and the xTool machine for it.

JobMaterialLaser typexTool machine
Engrave metal nameplates and business cardsStainless steel, brass, aluminum, anodized aluminum1064 nm infraredxTool F2
Engrave metal nameplates on your acrylic and wood laser cutterMetalFiberxTool X1 with 20W Diode Galvo and 30W Fiber
Engrave coated metal platesCoated metalDiodexTool F2
Engrave crystal and glass awards, on the surface or insideCrystal, glassUVxTool F2 Ultra UV
Engrave names and logos on acrylic awardsAcrylicUVxTool F2 Ultra UV
Cut acrylic awards from clear sheetClear acrylicCO₂xTool X1
Engrave and cut small wood tags and plaquesWoodDiodexTool F2
Cut and engrave full-size wood plaques and award basesWoodCO₂xTool X1

Best Laser Engravers for Metal Nameplates and Awards Compared

If you are choosing the best laser engraver for metal nameplates, the table below puts three xTool machines side by side, from the lasers and materials they handle to their price.

SpecxTool F2xTool F2 Ultra UVxTool X1
Best forMetal nameplates, business cards, and small metal tagsCrystal, glass, and acrylic awardsOne machine for cutting acrylic and wood awards, plus metal nameplates with the 30W Fiber
Laser15W blue diode + 5W 1064 nm infrared5W 355 nm UV55W CO₂ (standard); optional 20W Diode Galvo, required before adding 30W Fiber, 60W MOPA, or 5W UV
CutsDiode: wood, MDF, leather, felt, paper, some dark opaque acrylicUV: acrylic (not fully transparent), glass, wood, leather, paper, plasticsCO₂: wood, acrylic including clear acrylic, leather, fabric, paper
EngravesInfrared: stainless steel, brass, aluminum, anodized aluminum, plated metals, gold, silver; Diode: wood, leather, coated metal, some dark opaque acrylicUV: glass, crystal, acrylic, wood, metal, leather, ceramic; 2D and 3D inner engraving in glass and crystalCO₂: wood, acrylic, leather, and other non-metals; 20W Diode Galvo: wood, leather, dark acrylic, cardstock; 30W Fiber: metal names, logos, and serial numbers
Working area4.53" × 4.53" (115 × 115 mm); 15.75" × 4.53" (400 × 115 mm) with Slide ExtensionSurface: 7.9" × 7.9" (200 × 200 mm); 7.9" × 19.7" (200 × 500 mm) with conveyor; inner engraving: 2.8" × 2.8" (70 × 70 mm)24.2" × 12.6" (615 × 320 mm)
Max speed6,000 mm/s15,000 mm/sCO₂: 600 mm/s; galvo sources: 6,000 mm/s
Camera and placement50MP smart camera, autofocus, batch processingDual 48MP cameras, autofocus, LiDAR, 0.2 mm positioning accuracyTriple-camera system, LiDAR ranging, Variable Batch Fill
Laser safetyClass 4; wear OD6+ laser safety glasses rated for 445 nm, 655 nm, and 1064 nmClass 4; wear laser safety glasses rated for 355 nm; optional Fire Safety Set (sold separately)Class 1; built-in sensors monitor flame and temperature; optional Fire Safety Set 2 (sold separately)
Size and weight6.89" × 9.33" × 13.15"; 10.14 lb11.6" × 16.9" × 20.5"; 49.6 lb1,000 × 580 × 420 mm; 60 kg (main unit)
PriceAbout $1,299–$1,499 (F2 Standalone); About $1,499–$1,699 (F2 + Slide Extension)About $4,299 (F2 Ultra UV Standalone)About $3,699 (Single CO₂ Standalone); About $6,099 (CO₂ + Diode Galvo with 30W Fiber, Standalone)

Note: Prices may vary by configuration and current promotions.

In short, a metal-heavy shop fits the xTool F2, a crystal and acrylic award shop fits the xTool F2 Ultra UV, and a shop that cuts its own acrylic and wood blanks and also engraves metal fits the xTool X1.

What About the xTool F1 Ultra and xTool P2S?

You may also be comparing two other xTool machines.

The xTool F1 Ultra pairs a 20W fiber laser with a 20W diode laser on a larger 8.6" × 8.6" bed. The xTool F2 is lighter, at 10.14 lb versus 32.4 lb, and its camera is 50MP versus the F1 Ultra's 16MP. If you need the bigger bed for mostly metal work, look at the F1 Ultra. For small metal nameplates and business cards, the F2 is the better fit.

The xTool P2S is a 55W CO₂ laser with a 23.6" × 12" bed, built mainly for wood, acrylic, and other non-metals. It suits shops that make only wood and acrylic awards, while shops that also want to engrave metal nameplates on the same machine should look at the xTool X1.

xTool F2: Best for Metal Nameplates and Small Tags

If most of your orders are metal nameplates, metal business cards, and small metal plates, with some small wood signs mixed in, choose the xTool F2.

xTool F2 50MP camera previewing engraved pieces on the bed

Door plates, trophy plates, and staff name badges are often stainless steel, brass, or anodized aluminum, with a name, title, and date set in small type. The F2's 5W infrared laser engraves crisp detail with depth on these metals and on plated metals, so the F2 handles your metal orders on its own. Its 0.03 × 0.03 mm spot keeps small lettering and thin lines readable.

Door plates and desk signs are often ordered as a set, each with a different name. The F2's 50MP camera, autofocus, and one-click auto-fill lay out each name where its plate sits, and with the Slide Extension (sold separately), you can load a row of plates and let the F2 engrave them in sequence.

Small wood signs and coated metal plates also turn up in these orders, and the F2's 15W blue diode laser cuts and engraves wood and engraves coated metal, so they stay on the same machine.

The F2 is sized for small plates and cards, so full-size wood plaques belong on the xTool X1, while crystal and acrylic awards need the UV laser in the xTool F2 Ultra UV. It is a Class 4 laser, so the operator wears OD6+ laser safety glasses rated for 445 nm, 655 nm, and 1064 nm, and you can add a SafetyPro™ AP2 (sold separately) for fumes. Shops that mainly engrave metal in high volume can look at the xTool F2 Ultra (60W MOPA).

pc%2Fus%2Ff2%20standalone
pc%2Fimage%20-1
pc%2Fimage%20-2
pc%2Fimage%201868
pc%2Fimage%20-3
pc%2Fimage%20-6
pc%2Fimage%20-4
pc%2Fimage%20-5
pc%2Fimage%20-9
pc%2Fimage%20-7
pc%2Fimage%20-8
pc%2Fimage%20-10
pc%2Fus%2Ff2%20standalone
pc%2Fus%2Ff2%20slide%20extension
pc%2Fus%2Ff2%20air%20purifier%20go
pc%2Fus%2Ff2%20deluxe%20bundle
xTool F2 5W IR & 15W Diode Portable Dual Laser Engraver
pc%2Ff2
xTool F2 5W IR & 15W Diode Portable Dual Laser Engraver
pc%2Fimage%20-1
pc%2Fimage%20-2
pc%2Fimage%201868
pc%2Fimage%20-3
pc%2Fimage%20-6
pc%2Fimage%20-4
pc%2Fimage%20-5
pc%2Fimage%20-9
pc%2Fimage%20-7
pc%2Fimage%20-8
pc%2Fimage%20-10
pc%2Fus%2Ff2%20standalone
pc%2Fus%2Ff2%20slide%20extension
pc%2Fus%2Ff2%20air%20purifier%20go
pc%2Fus%2Ff2%20deluxe%20bundle
xTool F2 5W IR & 15W Diode Portable Dual Laser Engraver

xTool F2 5W IR & 15W Diode Portable Dual Laser Engraver

$1,299.00
  • 5W IR Laser: Perfect for premium metals and plastics, delivering vivid color engraving and deep black results.
  • 15W Diode Laser: Engrave and cut everyday materials like wood, acrylic, and leather with ease.
  • 50MP Smart Camera: Live preview for precise placement and minimized material waste.
  • Fast & Precise: Up to 6,000 mm/s speed for rapid, crisp batches.
  • Portable & Safe: Compact, eye-safe design built for on-site personalization.
View Details

xTool F2 Ultra UV: Best for Crystal, Glass, and Acrylic Awards

If your shop mostly makes crystal, glass, and acrylic awards, whether that means a name and logo on the surface or a 3D design inside crystal, choose the xTool F2 Ultra UV.

Crystal block with 3D inner engraving and engraved glass from the xTool F2 Ultra UV

Crystal awards for schools, sports leagues, and companies, and crystal keepsakes for weddings, can pair a 3D design inside with a name and logo on the surface. The F2 Ultra UV does 2D and 3D inner engraving in glass and crystal, and its 0.02 mm UV spot engraves fine surface detail on acrylic, glass, and crystal, so you can make the whole piece in your own shop.

A league or company order is often one award design repeated with different names, and any shift in placement shows when the awards stand side by side. The F2 Ultra UV's dual 48MP cameras, autofocus, and 0.2 mm positioning accuracy help keep placement consistent from piece to piece.

An award set may also include a wood base or a small metal plate, and because the F2 Ultra UV engraves wood, metal, leather, and ceramic as well, you can engrave those parts on the same machine.

The F2 Ultra UV cannot engrave inside acrylic or cut fully transparent acrylic, so clear acrylic blanks are a job for the xTool X1, and shops focused on metal nameplates should look at the xTool F2. On clear or mirrored pieces, switch to manual focus if autofocus does not read the surface. It is Class 4, so wear laser safety glasses rated for 355 nm, and at 49.6 lb it needs a fixed spot on a sturdy workbench. You can add the Fire Safety Set for automatic fire suppression and a SafetyPro™ AP2 for fume extraction, both sold separately.

pc%2Fus%2Ff2%20uv%20standalone
xTool F2 Ultra UV 5W UV Laser Engraver
pc%2Ffeatures
pc%2Fimage%201868
xTool F2 Ultra UV 5W UV Laser Engraver
xTool F2 Ultra UV 5W UV Laser Engraver
xTool F2 Ultra UV 5W UV Laser Engraver
xTool F2 Ultra UV 5W UV Laser Engraver
xTool F2 Ultra UV 5W UV Laser Engraver
xTool F2 Ultra UV 5W UV Laser Engraver
xTool F2 Ultra UV 5W UV Laser Engraver
xTool F2 Ultra UV 5W UV Laser Engraver
xTool F2 Ultra UV 5W UV Laser Engraver
xTool F2 Ultra UV 5W UV Laser Engraver
pc%2Fus%2Ff2%20uv%20standalone
pc%2Fus%2Ff2%20ultra%20uv%20%2B%20conveyor
pc%2Fus%2Ff2%20ultra%20uv%20deluxe%20bundle
xTool F2 Ultra UV 5W UV Laser Engraver
xTool F2 Ultra UV 5W UV Laser Engraver
xTool F2 Ultra UV 5W UV Laser Engraver
xTool F2 Ultra UV 5W UV Laser Engraver
pc%2Ffeatures
pc%2Fimage%201868
xTool F2 Ultra UV 5W UV Laser Engraver
xTool F2 Ultra UV 5W UV Laser Engraver
xTool F2 Ultra UV 5W UV Laser Engraver
xTool F2 Ultra UV 5W UV Laser Engraver
xTool F2 Ultra UV 5W UV Laser Engraver
xTool F2 Ultra UV 5W UV Laser Engraver
xTool F2 Ultra UV 5W UV Laser Engraver
xTool F2 Ultra UV 5W UV Laser Engraver
xTool F2 Ultra UV 5W UV Laser Engraver
xTool F2 Ultra UV 5W UV Laser Engraver
pc%2Fus%2Ff2%20uv%20standalone
pc%2Fus%2Ff2%20ultra%20uv%20%2B%20conveyor
pc%2Fus%2Ff2%20ultra%20uv%20deluxe%20bundle
xTool F2 Ultra UV 5W UV Laser Engraver

xTool F2 Ultra UV 5W UV Laser Engraver

$4,299.00
  • Master of Glass: Excels in 3D inner engraving, embossing, cutting, and fine engraving.
  • Unmatched Material Compatibility: Unlock more materials, even those that others can't.
  • Micron-Level Precision: Brings every detail to life with stunning clarity.
  • Burn-Free Edges: With cold processing, no prep or polishing—perfection in one step.
  • User-Friendly: Dual 48MP cameras, one-click 2D to 3D, 15,000 mm/s speed.
View Details

xTool X1: Best One-Machine Setup for Mixed Award Orders

If you cut your own acrylic award blanks and full-size wood plaques, take metal nameplate orders as well, and only have room for one machine, look at the xTool X1. To engrave metal, it needs the 20W Diode Galvo and the 30W Fiber added.

Engraved gold award plate next to the xTool X1

Alt: Engraved gold award plate next to the xTool X1

Acrylic awards start as clear sheet, and full-size wood plaques need more bed space than a compact engraver offers. The X1's standard 55W CO₂ laser cuts thick wood and clear acrylic, and its large working area holds a full plaque without repositioning, so you can cut blanks and plaques in your own shapes.

Metal nameplate orders still come in alongside the acrylic and wood work. With those two add-ons installed, the X1 handles everyday metal engraving such as names, logos, and serial numbers, so those orders do not need a second machine.

Each award in a batch carries a different name, and setting them up one by one takes time. The X1's triple-camera system and Variable Batch Fill recognize pieces of the same material and lay out the batch, whether you apply one design or several.

Crystal inner engraving belongs on the xTool F2 Ultra UV, and if you only make small metal nameplates, the xTool F2 is enough. The X1 is a Class 1 machine, and its built-in sensors monitor flame, temperature, and enclosure access. The main unit weighs 60 kg, so plan a permanent spot for it. You can add Fire Safety Set 2 for automatic fire suppression and a SafetyPro™ AP2 or AP2 Max for fume extraction, both sold separately.

pc%2Fxtool%20x1%20single%20co%E2%82%82%20standalone
pc%2F%E5%A4%9A%E5%85%89%E6%BA%90
pc%2F%E5%85%A8%E6%9D%90%E8%B4%A8
pc%2F%E6%8A%80%E6%9C%AF%E9%A2%86%E5%85%88
xTool X1 Next-Gen All-in-One Laser Cutter & Engraver
pc%2Fp%E7%B3%BB%E5%88%97%E5%AF%B9%E6%AF%94%E5%9B%BE
pc%2F%E5%8F%88%E5%88%87%E5%8F%88%E9%9B%95
pc%2F%E5%9B%9B%E8%BD%B4%E8%81%94%E5%8A%A8-%E5%A4%A7%E5%B9%85%E9%9D%A2
pc%2F%E5%9B%9B%E8%BD%B4%E8%81%94%E5%8A%A8-%E9%80%9F%E5%BA%A6
pc%2F%E9%80%9F%E5%BA%A6%20%E5%B9%85%E9%9D%A2%20%E7%B2%BE%E7%BB%86%E5%BA%A6%20%E4%B8%89%E5%90%88%E4%B8%80
pc%2Facs
pc%2F%E4%B8%89%E6%91%84
pc%2Fco2%E8%B6%85%E9%95%BF%E9%80%81%E6%96%99
pc%2F%E5%85%A8%E4%BA%A7%E5%93%81%E7%94%9F%E6%80%81
pc%2Fclass%201%20%E5%AE%89%E5%85%A8
pc%2F%E9%85%8D%E4%BB%B6%E7%94%9F%E6%80%81
pc%2Fxtool%20x1%20single%20co%E2%82%82%20standalone
pc%2Fxtool%20x1%20single%20co%E2%82%82%20versatile%20bundle
pc%2Fxtool%20x1%20single%20co%E2%82%82%20all-in-one%20bundle
pc%2Fxtool%20x1%20co2%20%2B%20diode%20galvo%20standalone
pc%2Fxtool%20x1%20co2%20%2B%20diode%20galvo%20versatile%20bundle
pc%2Fxtool%20x1%20co2%20%2B%20diode%20galvo%20all-in-one%20bundle
pc%2Fxtool%20x1%20co2%20%2B%20diode%20galvo%20%2B%20fiber%20standalone
pc%2Fxtool%20x1%20co2%20%2B%20diode%20galvo%20%2B%20fiber%20versatile%20bundle
pc%2Fxtool%20x1%20co2%20%2B%20diode%20galvo%20%2B%20fiber%20all-in-one%20bundle
pc%2Fxtool%20x1%20co2%20%2B%20diode%20galvo%20%2B%20mopa%20standalone
pc%2Fxtool%20x1%20co2%20%2B%20diode%20galvo%20%2B%20mopa%20versatile%20bundle
pc%2Fxtool%20x1%20co2%20%2B%20diode%20galvo%20%2B%20mopa%20all-in-one%20bundle
pc%2Fxtool%20x1%20co2%20%2B%20diode%20galvo%20%2B%20uv%20standalone
pc%2Fxtool%20x1%20co2%20%2B%20diode%20galvo%20%2B%20uv%20versatile%20bundle
pc%2Fxtool%20x1%20co2%20%2B%20diode%20galvo%20%2B%20uv%20all-in-one%20bundle
pc%2F%E5%8D%95%E6%9C%BA-sku%E7%99%BD%E5%BA%95%E5%9B%BE
pc%2F%E5%A4%9A%E5%85%89%E6%BA%90
pc%2F%E5%85%A8%E6%9D%90%E8%B4%A8
pc%2F%E6%8A%80%E6%9C%AF%E9%A2%86%E5%85%88
xTool X1 Next-Gen All-in-One Laser Cutter & Engraver
pc%2Fp%E7%B3%BB%E5%88%97%E5%AF%B9%E6%AF%94%E5%9B%BE
pc%2F%E5%8F%88%E5%88%87%E5%8F%88%E9%9B%95
pc%2F%E5%9B%9B%E8%BD%B4%E8%81%94%E5%8A%A8-%E5%A4%A7%E5%B9%85%E9%9D%A2
pc%2F%E5%9B%9B%E8%BD%B4%E8%81%94%E5%8A%A8-%E9%80%9F%E5%BA%A6
pc%2F%E9%80%9F%E5%BA%A6%20%E5%B9%85%E9%9D%A2%20%E7%B2%BE%E7%BB%86%E5%BA%A6%20%E4%B8%89%E5%90%88%E4%B8%80
pc%2Facs
pc%2F%E4%B8%89%E6%91%84
pc%2Fco2%E8%B6%85%E9%95%BF%E9%80%81%E6%96%99
pc%2F%E5%85%A8%E4%BA%A7%E5%93%81%E7%94%9F%E6%80%81
pc%2Fclass%201%20%E5%AE%89%E5%85%A8
pc%2F%E9%85%8D%E4%BB%B6%E7%94%9F%E6%80%81
pc%2Fxtool%20x1%20single%20co%E2%82%82%20standalone
pc%2Fxtool%20x1%20single%20co%E2%82%82%20versatile%20bundle
pc%2Fxtool%20x1%20single%20co%E2%82%82%20all-in-one%20bundle
pc%2Fxtool%20x1%20co2%20%2B%20diode%20galvo%20standalone
pc%2Fxtool%20x1%20co2%20%2B%20diode%20galvo%20versatile%20bundle
pc%2Fxtool%20x1%20co2%20%2B%20diode%20galvo%20all-in-one%20bundle
pc%2Fxtool%20x1%20co2%20%2B%20diode%20galvo%20%2B%20fiber%20standalone
pc%2Fxtool%20x1%20co2%20%2B%20diode%20galvo%20%2B%20fiber%20versatile%20bundle
pc%2Fxtool%20x1%20co2%20%2B%20diode%20galvo%20%2B%20fiber%20all-in-one%20bundle
pc%2Fxtool%20x1%20co2%20%2B%20diode%20galvo%20%2B%20mopa%20standalone
pc%2Fxtool%20x1%20co2%20%2B%20diode%20galvo%20%2B%20mopa%20versatile%20bundle
pc%2Fxtool%20x1%20co2%20%2B%20diode%20galvo%20%2B%20mopa%20all-in-one%20bundle
pc%2Fxtool%20x1%20co2%20%2B%20diode%20galvo%20%2B%20uv%20standalone
pc%2Fxtool%20x1%20co2%20%2B%20diode%20galvo%20%2B%20uv%20versatile%20bundle
pc%2Fxtool%20x1%20co2%20%2B%20diode%20galvo%20%2B%20uv%20all-in-one%20bundle
xTool X1 Next-Gen All-in-One Laser Cutter & Engraver

xTool X1 Next-Gen All-in-One Laser Cutter & Engraver

$3,399.00
  • Hybrid Motion™: 6,000 mm/s Speed, Faster, Larger, More Efficient Batches.
  • Laser Swap™: Five Lasers, One Expandable Platform—CO₂, Diode, UV, MOPA, Fiber.
  • All-in-One Capability: Thick Cutting, Fine Engraving, Glass, Metal & Nearly All Materials.
  • ACS™ Smart Workflow: Triple-Camera Precision, AutoLift, Less Manual Setup.
  • Class 1 Safety¹: Multi-Layer Protection and Fire Safety for Long Runs.

View Details

Which xTool X1 Setup Do You Need for Metal Nameplates?

The setups differ in whether they can engrave metal. If you only cut and engrave acrylic and wood awards, Single CO₂ is enough, and you can buy the 20W Diode Galvo separately later if your work changes. If you engrave metal nameplates now or expect to, order CO₂ + Diode Galvo with the 30W Fiber added. For color engraving, embossing, or cutting metal, choose the 60W MOPA instead.

Conclusion

Choose the xTool F2 if metal nameplates make up most of your work, and the xTool F2 Ultra UV if crystal, glass, and acrylic awards lead. For one machine that cuts clear acrylic and full-size wood plaques and also engraves metal, choose the xTool X1 with the 20W Diode Galvo and 30W Fiber added. Before you order, measure your largest plate against the working area. Before the first job, set up laser cutter ventilation, and on a Class 4 machine, wear glasses rated for the laser's wavelength. If your projects go beyond awards and nameplates, our guide on how to choose an xTool machine covers the rest of the lineup.

FAQ

What type of laser do I need to engrave stainless steel and brass nameplates?

You need a 1064 nm infrared or fiber laser. For example, the xTool F2's 5W infrared laser engraves stainless steel and brass, and if the same machine also has to cut acrylic and wood, the xTool X1 with the 20W Diode Galvo and 30W Fiber added engraves metal nameplates too.

Can the xTool F2 engrave anodized aluminum business cards and nameplates?

Yes. The F2's 5W infrared laser engraves anodized aluminum, so business cards and nameplates in that metal work on it. If a card is coated metal rather than anodized, the F2's blue diode laser can engrave it too.

Which laser can engrave a 3D design inside a crystal award?

Inner engraving in crystal takes a UV laser. For example, the xTool F2 Ultra UV does 2D and 3D inner engraving in glass and crystal. It cannot engrave inside acrylic.

Can the xTool F2 Ultra UV cut clear acrylic awards?

No. The F2 Ultra UV cuts acrylic that is not fully transparent, though it can engrave names on clear acrylic awards. To cut blanks from clear sheet, use a CO₂ laser such as the xTool X1.

How large a nameplate can the xTool F2 engrave at one time?

A single nameplate can be up to 4.53" × 4.53" (115 × 115 mm) on the standard bed. With the Slide Extension, the F2 takes long nameplates up to 15.75" × 4.53" (400 × 115 mm), or a row of smaller ones in one run.

Do I need laser safety glasses to engrave nameplates and awards?

Yes, if your machine is Class 4. OSHA's guidance on laser hazards treats Class 4 lasers as hazardous to view directly or as scattered light, so on the xTool F2 and xTool F2 Ultra UV, wear laser safety glasses rated for the laser's wavelength while it runs. A Class 1 machine such as the xTool X1 keeps the laser inside its enclosure during normal use.

For more questions, please join our community to get inspired!

{"statementLink":"https://www.xtool.com/pages/accessibility-statement","footerHtml":"Web Accessibility","hideMobile":false,"hideTrigger":false,"disableBgProcess":false,"language":"en","position":"left","leadColor":"#1677ff","triggerColor":"#1677ff","triggerRadius":"50%","triggerPositionX":"right","triggerPositionY":"bottom","triggerIcon":"people","triggerSize":"medium","triggerOffsetX":32,"triggerOffsetY":140,"mobile":{"triggerSize":"medium","triggerPositionX":"right","triggerPositionY":"bottom","triggerOffsetX":20,"triggerOffsetY":180,"triggerRadius":"50%"}}