Every X1 includes a 55W CO₂ laser. To expand, you must add the 20W Diode Galvo Module, which unlocks UV, MOPA, and Fiber expansion.
X1 starts with a 55W CO2 laser. Add the 20W Diode Galvo Module to unlock high-speed engraving and future expansion with 5W UV, 60W MOPA, and 30W Fiber. One platform, five laser sources, more possibilities.
xTool X1 is powered by Hybrid Motion™, a 4-axis flying galvo system that synchronizes the gantry’s X-Y motion with dual galvo mirrors, delivering speeds of up to 6,000 mm/s across a large-format workspace. The result is larger projects, faster and finer engraving, and higher productivity—all in one machine.
CO2 lasers deliver higher power and excel at cutting, while galvo lasers are built for high-speed, fine engraving. xTool X1 brings both together with a 55W CO2 laser and a 20W Diode Galvo Module, combining powerful cutting and precision engraving in one machine.
Different materials perform best with different lasers—and for years, that often meant different machines. Starting with CO₂ and the 20W Diode Galvo Module, X1 can expand further through Laser Swap™ with optional 5W UV, 60W MOPA, and 30W Fiber sources. Start with what you need today, then add new laser sources as your materials, projects, and business grow.
With up to 4× the work area of a typical galvo laser, X1 handles oversized creations with ease. Up to 12× larger glass inner engraving volume opens up more possibilities for crystal awards and glass keepsakes. Nearly 2× larger metal embossing area enables bigger, higher-value metal products.
X1 delivers an unprecedented “Place & Go” workflow with ACS™. The triple-camera system locates your material with precision, while the AutoLift Base automatically adjusts the bed height. Less setup, less guesswork, more productivity.
Powered by Atomm AI, X1 takes you beyond flat designs into structure builds with ease. Explore 130+ generators, 60,000+ projects, 10,000+ exclusive creations, step-by-step tutorials, recommended materials, and more—all designed to make creating easier.
"Basically it's all the best lasers built into one... you can unlock all these new materials and business opportunities all on a single platform."
"If you run a small laser business that combination means bigger higher value products from one machine with one small footprint."
"That's when the X1 starts making sense especially with a bed size with the UV and the fiber... you don't have to buy it all at one time, we can have time and room to upgrade."
"If you're running a small business I think the practical side of it is quite appealing... you've got one enclosure and you choose the laser source that suit what you're actually making."
"Think about awards wow this is awesome... you can do them batch right obviously that would be a very high-end chess set that's pretty epic... really this is going to scale up a lot."
Place a deposit now to get:
You’ll also be automatically entered into the X1 Giveaway for a chance to win a free X1. The winner will be announced during the launch livestream.
Shipping starts on October 29. Launch stock will be limited. Shipping priority will be based on order completion time, including both final payments and direct purchases.
You can secure your X1 with a $100 deposit without deciding on a specific configuration just yet. When the final payment period begins, you'll be able to explore the available X1 configurations and pricing, choose the setup that best suits your needs, and complete your purchase.
Yes. If you decide not to buy X1, you can get a full refund of your deposit before making the final payment. Once you complete the final payment, the deposit becomes part of your purchase and is no longer refundable separately.
Yes! During the X1 launch period, enjoy exclusive launch pricing on different X1 configurations, plus 10% off laser sources purchased separately.
Choose from UV, MOPA, or Fiber laser sources based on your needs to unlock more materials, applications, and creative possibilities.
X1 has several dedicated accessories designed specifically for the platform, including:
X1 also supports a range of compatible xTool accessories, including:
Exclusive launch discounts will be available on select accessories. Stay tuned for more details!
X1 Single CO₂ comes with the 55W CO₂ laser head only.
X1 CO₂ + Diode Galvo comes with both the 55W CO₂ laser head and the 20W Diode Galvo Module.
The Diode Galvo Module is required if you want to add UV, MOPA, or Fiber laser sources later.
If you want more room to expand in the future, we recommend choosing X1 CO₂ + Diode Galvo. If you start with X1 Single CO₂, you can still add the 20W Diode Galvo Module later.
Every X1 includes a 55W CO₂ laser. To expand, you must add the 20W Diode Galvo Module, which unlocks UV, MOPA, and Fiber expansion.
If you plan to use UV, MOPA, or Fiber later, choose the X1 version with the 20W Diode Galvo Module.Different laser sources offer different capabilities. Compare their key differences below and choose the one that best fits your projects and processing needs.
55W CO₂: Best for cutting. Great for wood, acrylic, leather, paper, and many other common non-metal materials.
20W Diode: Best for fast, detailed engraving on wood, leather, dark acrylic, cardstock, and more.
5W UV: The only X1 laser source that supports glass inner engraving. Its low-heat processing enables ultra-fine engraving on almost any material.
30W Fiber: Best for metal marking and deep 3D engraving with detailed, high-contrast results.
60W MOPA: Best for faster and more advanced metal work. Compared with 30W Fiber, it offers finer detail, faster processing, and better results for color emgraving and rembossing.
xTool X1 is ideal for creators and small business owners who want to start with CO₂ cutting and engraving, take on larger projects, and expand into more materials and applications, such as glass and metal, as their needs grow—all without replacing the entire machine. Its processing speed reaches up to 6,000 mm/s.
The F Ultra Series is designed for users who prioritize higher speeds (up to 15,000 mm/s), specialized performance, and portability. It's especially suited for professionals who need advanced metal and glass processing, and on-the-go customization.
In short: Choose X1 for versatility, larger projects, and future expandability. Choose the F Ultra Series for speed, specialized performance, and portability.
Different laser sources have different optical characteristics, and processes such as inner engraving, relief engraving, and color engraving have different requirements for focus control, energy distribution, precision, and stability. As a result, their maximum processing areas vary.
X1 is optimized for each laser source and its typical applications, balancing processing precision, structural constraints, and overall output quality. This allows each source and process to achieve the largest practical work area while maintaining stable, consistent results.
NO PURCHASE OR PAYMENT OF ANY KIND IS NECESSARY TO ENTER OR WIN THIS SWEEPSTAKES. A PURCHASE OR PAYMENT WILL NOT INCREASE YOUR CHANCES OF WINNING. OPEN ONLY TO LEGAL RESIDENTS OF THE ELIGIBLE TERRITORIES SPECIFIED BELOW WHO ARE AT LEAST 18 YEARS OLD AND HAVE REACHED THE AGE OF MAJORITY IN THEIR PLACE OF RESIDENCE AT THE TIME OF ENTRY. VOID WHERE PROHIBITED BY LAW.
SWEEPSTAKES SPONSOR: The xTool X1 Launch Giveaway (the “Sweepstakes”) is sponsored by the legal entity identified as the operator of the website hosting this Sweepstakes in that website’s Terms of Service (“Sponsor”). Sponsor’s legal name and address are set out in those Terms of Service. Sponsor’s decisions concerning the administration of this Sweepstakes shall be made reasonably and in accordance with these Rules and applicable law, without limiting entrants’ statutory rights.
This Sweepstakes is not sponsored, endorsed, or administered by, or associated with, Facebook, Twitter, Instagram, or YouTube. Any inquiries regarding this Sweepstakes are to be directed to Sponsor.
SWEEPSTAKES PERIOD: The Sweepstakes starts at 12:00 a.m. PDT on October 12, 2026, and ends at 8:00 p.m. PDT on October 28, 2026. Sponsor’s computer will be the official time-keeping device. Entries received after the Sweepstakes Period will not be eligible.
BINDING AGREEMENT: These Official Sweepstakes Rules (“Rules”) constitute a legally binding agreement by and between Sponsor and entrant and govern entry in the Sweepstakes. Participation constitutes entrant’s full and unconditional agreement and acceptance of these Sweepstakes Rules which shall be final in all respects. Failure to comply with these Rules will void participant’s entry. Winning a prize (“Prize(s)”) is contingent upon fulfilling all requirements set forth herein. In the event there is a discrepancy or inconsistency between disclosures or other statements contained in any other Sweepstakes or promotional materials and the terms and conditions of these Rules, these Rules shall prevail, govern and control.
ELIGIBILITY: The Sweepstakes is open to legal residents of the countries and territories expressly listed as eligible on the Sweepstakes page who are at least 18 years old and have reached the age of majority in their place of residence at the time of entry. Employees of Sponsor and its affiliates, and their immediate family members or household members, are not eligible to participate. This Sweepstakes is void where prohibited by law.
HOW TO ENTER:
Eligible participants may enter the X1 Giveaway through either of the following methods:
All eligible entries have an equal chance of winning. A purchase or deposit will not increase the chances of winning. Participation is subject to verification of eligibility and compliance with these Rules.
AN ELIGIBLE PARTICIPANT MAY ENTER THIS SWEEPSTAKES ONLY ONE (1) TIME REGARDLESS OF METHOD OF ENTRY.
PRIZE WINNER(S):
One (1) potential winner will be selected at random from all eligible entries received during the Sweepstakes Period, subject to verification of eligibility and compliance with these Rules.
The winner will receive one (1) xTool X1 CO₂ Standalone, with an approximate retail value (ARV) of $3,399 USD.
Winners are considered potential winners pending verification of eligibility and compliance with these Rules. Each winner can only win one prize. Prize(s) are non-transferable, non-exchangeable, and non-refundable, except at Sponsor’s discretion.
Odds of winning the Sweepstakes prize(s) are subject to the number of eligible entries received during the Sweepstakes Period. At Sponsor’s discretion, any unclaimed prize(s) may not be awarded.
WINNER NOTIFICATION: Potential Winners will be notified via email by October 31, 2026, at 6:00 PM PDT. If a potential winner cannot be contacted or fails to comply with these Rules, the prize will be forfeited.
RELEASE AND LIMITATIONS OF LIABILITY: By participating in this Sweepstakes, you agree to release and hold harmless Sponsor and its affiliates from any claims or liability arising from participation in the Sweepstakes or the acceptance, receipt, or use of any prize(s). Sponsor makes no warranties regarding the prize(s), which is provided "as is."
ADDITIONAL RULES: Sponsor reserves the right to cancel or modify the Sweepstakes or these Rules at any time. Any attempt to undermine the legitimate operation of the Sweepstakes is a violation of criminal and civil laws, and Sponsor reserves the right to seek damages to the fullest extent permitted by law.
Participants must provide accurate information and comply with all event rules. Any attempt to manipulate the promotion, provide false information, or obtain multiple gifts unfairly will result in disqualification.
Specific shipping restrictions may apply based on local/state laws, hazmat materials, large or oddly shaped items, or specific address types that some carriers cannot deliver to.
GOVERNING LAW: These Rules and any disputes arising out of or in connection with the Sweepstakes shall be governed by the laws specified in the Terms of Service of the website hosting this Sweepstakes.
WINNER LIST: The winner's name may be announced via email from order.confirmation@xtool.com.
PRIVACY POLICY: Personal information collected in connection with this Sweepstakes will be processed by Sponsor and its service providers to administer the Sweepstakes, verify eligibility, contact winners, deliver prizes, and comply with applicable legal obligations, in accordance with the Privacy Policy available on the website hosting this Sweepstakes.
Enquiry: For all enquiries, please contact hello@email.xtool.com
Important Notes:
*¹When the xTool X1 5W UV Galvo Source is installed, Class 3B laser radiation is accessible during optical alignment. When used with the xTool X1 Intelligent Conveyor Feeder, the X1 operates as a Class 4 laser device. These configurations are intended for use by trained professionals only. Always follow the safety instructions and protective measures specified in the user manual.
