3 Modules. Infinite Possibilities.
Witness the Wonders in Action
Precision settings, down to every 1 °C and 1 kg
2X flatness for edge-to-edge pressure uniformity & consistent heat conduction
Ultra heat evenness to eliminate peeling
2X height (up to 3''/75 mm) to easily fit in thick objects
Heat Press Made Superior.
Best-in-Class Auto Heat Press
Two 3D Workflows. In One Module.
Mode 1: 3D Sublimation
Ready to transcend the flat? Watch as sublimation films contour flawlessly to every edge and curve—turning phone cases, badges, and keycaps into high-end, full-wrap masterpieces
Mode 2: Vacuum Forming
Heat. Press. And mold. WonderPress softens the forming sheet and vacuums it tightly around your template. In seconds, you get a custom-fit mold with every detail preserved.
Truly Beginner-Friendly Vacuum Forming
Cure & Press. DTF Must-Have.
Breathe Easy. Cure Safe.
The Craft Oven integrates xTool’s 3-layer professional-grade air purification, neutralizing DTF fumes and odors at the source. Enjoy a safe, fresh studio without the need for expensive extra air purifiers.
Go Big. Bake More.
With an expansive internal volume (W × D × H: 15.2" × 6.2" × 3.1"/38.61 cm × 15.75 cm × 7.87 cm), the Craft Oven can even shrink sublimate 3 mugs at once, supporting plastic shrinking, polymer clay baking, and more.
Replace Multiple Heavy Footprints
Easy-to-Use Engineering
Elevate Every Machine You Own.
Why xTool WonerPress Outperforms the Rest
Top Sellers Made with WonderPress
Diverse Accessories Simplify Creations
Specifications
FAQ
Shipping via our official website is expected to begin in September.
Due to the success of our Kickstarter campaign, we are prioritizing production and delivery for our early Kickstarter backers first.
Unlike traditional presses that rely on guesswork, WonderPress combines industrial power with surgical precision through four core breakthroughs:
Yes, absolutely! All of our extensive modules will be available for separate purchase, allowing you to upgrade your setup whenever you are ready.
Yes! WonderPress operates beautifully via the physical machine interface, but it also integrates with the xTool Studio App for an enhanced experience. You can view and adjust temperature, pressure, time, and modes directly on the machine's 1.8-inch smart screen, or use the App for even more intuitive and efficient parameter settings.
Additionally, for the 3D Form Module, we provide a dedicated design platform—the Photo Case & Badge Generator—to help you perfectly align graphics for phone cases and badges before printing.
No. The Craft Oven Module features a built-in, industry-leading 3-layer purification system (H11 filter + Carbon + H13 HEPA) that blocks up to 99.95% of DTF fumes, smoke, and odors. It is completely safe for indoor home studio use.
Yes, it is. To maintain optimal air purification, the H13 HEPA and activated carbon filter can be easily replaced. Replacement filters will be available for purchase on xTool.com later on.
Not everything is suitable for molding, as some shapes can get "stuck" in the plastic. For the best experience:
1. Look for "Slopey" Shapes: Choose objects that are wider at the bottom and narrower at the top (like a pudding cup). This is called a Draft Angle, and it helps the mold pop right out.
2. Avoid "Hooks": Avoid objects with jutting parts or holes on the sides (called Undercuts). These will trap the plastic and make it impossible to pull your object out.
3. Use Flexible Sheets: For tricky shapes, our flexible TPU sheets make de-molding much easier!
Additionally, the bottom of the forming area is close to the heating plate, so objects can heat up quickly during the process. If you put your object into the machine at the same time as the sheet, the object should be heat-resistant up to 100°C. For items that cannot withstand this heat, we recommend heating the plastic sheet to temperature first, and then placing your object inside just before the vacuum activates.
WonderPress is designed to be an open-source platform. While we offer high-quality xTool materials optimized for the best results with our pre-tested settings, you can use any standard sublimation paper, sublimation film, HTV, or vacuum-forming plastic sheets (e.g., TPU, PETG, HIPS).
However, only xTool sheets are pre-cut to the exact dimensions needed to fit our module smoothly.
It is engineered for professional efficiency. While the system hosts 35 presets in total, the interface is modular and contextual. The machine automatically filters and displays only the relevant presets for the specific module you have installed.
When you switch modules, the system switches with you—keeping your workspace clean, focused, and foolproof.
Important Note:
All specifications, comparative data, and processing features are based on xTool's internal testing under controlled conditions or publicly available information. Product images and videos are for illustrative purposes only. Actual performance and individual outcomes may vary significantly depending on material properties, parameter settings, user technique, and environmental factors.
