xTool 40W Laser Module for D1 Pro

United States (most states)*, Canada, Australia, New Zealand, South Africa, Israel, Singapore, and China (mainland and Hongkong SAR). For more information, please check here. 

 *Not yet available states in the US: Alaska, Hawaii, Puerto Rico, Guam, Armed Force Pacific, Armed Forces Europe, Armed Forces Americas.

1. You can use the xTool D1 Pro 40W Laser Module on the xTool D1 frame just like you would with the xTool D1 Pro. In both cases, you will need to replace the plate, motherboard, and connecting cables (but note that the limit switch won't work).

 2. Once you've installed the xTool D1 Pro 40W Laser Module on the xTool D1, you won't be able to use the xTool D1 series laser module (D1 1064nm module, D1 20W laser module, etc.) on the new plate and mainboard. If you need to use the xTool D1 series laser module again, you'll have to switch back to the xTool D1 plate and motherboard before using it.

 That said, due to the inconvenience incurred during the switching process, we don't recommend using 40W laser module on xTool D1.

D1 Pro 5W laser module, D1 Pro 10W laser module, D1 Pro 20W laser module, 1064nm infrared laser module for D1 Pro.

Yes! For your convenience, please pick recommendations in the FBT (Frequently Brought Together) section.

Must-haves: The Honeycomb and the Air Assist Set. Processing on honeycomb avoids laser shooting your desk. Plus, the 40W laser outputs stronger power and heat, having much more dust lying in the laser head. Therefore the Air Assist Set is necessary since it dissipates the heat, blows away the dust, protects the lens, and makes your project clean without burn marks. Remember to clean your laser head and shield often.

90% of users also order RA2 Pro for cylindrical processing, like tumbler engraving, Christmas ball crafting, and ring engraving.

0.1*0.15mm.

No, it only cuts opaque acrylic like the black, red, or orange one.