We Promise Excellence in Every Aspect.
Still Hesitant? See What You're Really Investing In.
See Your ROI: Save More. Earn More.
Our machine isn't an expense — it's a strategic investment that pays for itself. Select a scenario to see your specific return and discover how it turns saved time, resources, and effort into a bigger bottom line.
Real Success Stories: High ROI, Zero Learning Curve
"No more spending $250K on outsourcing "
I've been looking for a CNC laser cutter for under $20,000. I can make these with the MetalFab cheaper than I can make them on a very expensive machine. Everything stays in house... my material costs and production costs go way down. I don't have to go out and spend a quarter million dollars for a commercial laser cutter, the cost of the MetalFab is well worth it. I will get a really quick return on my investment by doing this.
"Slashed my material costs by 87% and eliminated a 2-week supplier lead time."
Our business is primarily industrial engraving & marking, we make a ton of stainless steel cable tags. We used to buy them from a supplier, but with the MetalFab I am now making my own. My cost to buy these tags from my supplier is around $1.75 each with a 2 week lead time, I just cranked out 400 of them this afternoon and my material cost is $0.23 each.
"Seamlessly handle high-volume commercial orders."
The company where I worked in laser cutting closed just as the MetalFab arrived, so it took over very easily—even though I came from a 4kW Durma industrial fiber laser. A very large order was made to me 2 weeks ago in cutting and welding to create Christmas market stands. Once again your machine proved its reliability and performance in cutting as well as in welding (even my client had never seen this).
"Welding 14-gauge rectangular tubes like butter"
Been working on an upgraded CNC table for the shop. Using 14ga 3x2 rectangular tube for the table, 14ga 2 x 2 for the legs, and 14 ga carbon steel sheet for the top. 1.6mm wire for welding and cutting like butter. 1.6mm was more forgiving with fitment gaps and worked out great for this project.
"From prototype to a sellable product in under 2 hours—even with complex 3mm brass."
Late model Harley Davidson Fatboy... with such a tight tolerance fitment it is hard to know what you will really get when you do the actual part. In this case, really cool to be able to drag and drop the file into the screen... and not only a good prototype pop out but also have a sellable product. Just look at those amazing cuts in 3mm brass. Knocking out prototypes like this in under 10 minutes helps us introduce new products to the marketplace faster and for a lot less investment.
"It cut through 7-gauge carbon steel really clean."
I’m making some post-setting blocks to raise a high-end client’s pergola, and the MetalFab has been a perfect tool for the job. After adding the extended nozzle tip and getting my oxygen set up, it cut through 7-gauge (about 4.5–6 mm) carbon steel really clean.I’ve done a few test welds with a hammer test in a vise and haven’t had any cracks or breaks. I want to make sure I’m set up for consistent, clean welds all the way through.
"Clean cuts on 4-foot custom signs—my customers are stoked."
Put the MetalFab to use today and made a big ol sign... this one is 4ft x 2ft and made of 16ga steel cut using only compressed air. Customer was stoked and I'm onto the next job!
Flexible Ways to Invest in Your Growth
*Discounts cannot be stacked, please choose the biggest savings.
Why Settle? See How xTool MetalFab Outperform Others
Accessories and Consumables
Choose the necessary parts according to your needs and consuming frequency.
xTool Selected Air Compressor & Air Dryer
Generate air for CNC metal cutting (up to 4mm stainless steel
Double-layer Cutting Nozzle Set
Dross-free carbon steel cuts of 2mm and above (extra oxygen required.)
SaveGas Cutting Nozzle Set
1 set included in the CNC package with an estimated lifespan of 1 month.
Ordinary Cutting Nozzle
1pcs included in the CNC package with an estimated lifespan of 3 months.
Welding Nozzle Set
1 set included in the welder package with an estimated lifespan of 3 months.
Ordinary Protection Lens
10pcs included in the welder package with an estimated lifespan of 2 months.
FAQ
xTool MetalFab can cut/stainless steel, aluminum, brass, carbon steel, galvanized sheet, titanium, nickel alloy, magnesium.
Welding and cutting capabilities:
- The 1200W welder can weld up to 5mm stainless steel/carbon steel, while the 800W model handles up to 4mm.
- The 1200W welder can cut (handheld cutting) up to 5mm stainless steel/carbon steel, while the 800W model handles up to 3mm.
When paired with a CNC cutting platform:
- 1200W: Burr-free cuts for 5mm stainless steel, 4mm aluminum, 3mm brass, 10mm carbon steel/galvanized sheet. Cut Max. 12mm carbon steel with dross.
- 800W: Burr-free cuts for 4mm stainless steel, 2mm aluminum, 2mm brass, 8mm carbon steel/galvanized sheet.
Design differences:
- The 1200W welder includes a free wire feeder, while the 800W model has a built-in wire feeding mechanism and is lighter in weight.
1. Nozzle: First, we recommend using the double-layer nozzle set (add-on): For carbon steel ≤8mm, use the D1.2 nozzle; for carbon steel ＞8mm, use the D1.0 nozzle.
2. Gas: We recommend using 99.99% oxygen at 0.05-0.06 MPa (for 1200w version) for cutting thick carbon steel. Do not use air, nitrogen, or argon, as they will lead to a lot of dross.
3.Pattern: We recommend avoiding intricate designs when cutting thick metal. The minimum gap of the cutting pattern should not be smaller than the metal thickness. For 10mm steel, circles and rectangles can achieve the best results.
4. Must-Know Notes: Continuous cutting of thick carbon steel may lead to overheating, which can affect normal processing and require manual cooling (Continuous cutting of about 15min for 10mm steel for reference. The actual time may vary from use, thickness, etc.)
Welding: Nitrogen or argon gas with purity above 99.99% is suitable for most metals. The required welding pressure ranges from 0.1–0.2 MPa, with a gas flow rate of 15–30 L/min (argon is required for welding titanium alloys).
Cutting: Compressed air, nitrogen/argon (purity >99.99%), or oxygen are commonly used as shielding gases.
- xTool air compressor and air dryer provide stable compressed air, enabling burr-free cuts at 0.6 MPa for 4mm stainless steel, 4mm aluminum, 3mm brass, 1mm carbon steel, and galvanized steel (1200W laser) when paired with xTool SaveGas™ Nozzle. This setup significantly reduces costs compared to gas cylinders.
- Nitrogen/argon (at 1.2 MPa) can achieve burr-free cuts for the same materials (1200W).
- Oxygen is primarily used for cutting carbon steel and galvanized steel above 1mm thick. With a dual-layer nozzle and focal extension tube at 0.05–0.06 MPa, it can cut up to 10mm carbon steel/galvanized steel (1200W).
Cleaning: Compressed air is sufficient, but nitrogen or argon is recommended for brighter, oxidation-free results.
Yes, xTool MetalFab supports engraving on stainless steel, galvanized steel, titanium, and coated metals (e.g., anodized aluminum). It supports vector engraving, vector filling, and bitmap filling. Just use XCS for one-click parameter setup!
Note: To protect the laser, avoid engraving on high-reflectivity metals like copper.
The camera-driven workflow will significantly enhance your metalwork efficiency and minimize material waste.
xTool MetalFab integrates dual high-definition cameras for intelligent metal processing-advantages that products without cameras cannot match:
The 16MP Panoramic camera captures full-bed imaging for precise positioning and enables Smart Nesting function with up to 98.7% material use. The close-range camera enables micron-level precision for secondary/fine processing through localized high-res imaging.
xTool MetalFab operates on the XCSSoftware, designed for intuitive control and streamlined workflows:
It features the Material EasySet Library with100+ pre-optimized parameters for 30+ materials. You only need to select the material you want to cut, and all parameters can be applied with a single click. It also supports Auto Lead-in Lines, Automatic Path Optimization, which significantly improves cutting efficiency.
We have designed xTool MetalFab to ensure a smooth and simple user experience, so you don’t need to worry about lacking experience—you can get started in just five minutes!
It features the 550g ultra-light integrated welding gun which enables a 5-second quick-release. The 8-Inch Smart Touchscreen has 108+ built-in parameters for one-click use.
xTool MetalFab can weld up to 5mm stainless steel or carbon steel, and we have passed SGS welding quality tests, so you can rest assured about its performance and reliability!
Yes, we are building a global localized service network, with established local service teams in the U.S. and Europe. You can access:
- 24/7 online support (via email, live chat, or phone).
- 1-on-1 dedicated warranty assistance.
- Demo room reservations for in-person machine testing and material trials.
You can access the after-sales policy, shipping policy, warranty policy via the link.
The MetalFab laser welder operates at a voltage of 200-240V.
The 1200W model requires a circuit of 21A or higher, with a maximum power output of up to 4200W, while the 800W model requires a circuit of 15A or higher, with a maximum power output of 3000W (for Europe, a standard 230V-16A circuit can support the 800W model without modifications).
The CNC cutter is compatible with dynamic voltages of 100-240V.
For the US/CA, we provide NEMA-50P or NEMA-30P plugs. For other regions, we offer power cables that need to be installed by a qualified electrician. Please refer to the article for specific power requirements.
Customer Reviews
I made my first laser weld today on some scrap 6061 T6 aluminum and was surprised at how well it went. 3” long bead took 5-6 seconds and provided 100% penetration. This will be a game changer for me especially on aluminum and will replace my TIG unit for many welding projects. Highly recommended!
I truly didn’t expect this machine to arrive the way it did. I felt like it was shipped in a first class seat in an aircraft. I can’t wait to get started
The xTool Metal Fab is an absolute powerhouse for anyone serious about metal fabrication. From the moment it’s set up, it’s clear this machine was designed with precision, efficiency, and reliability in mind. Cuts are clean, consistent, and professional-grade, whether working on thin sheets or more demanding materials.
What really stands out is the thoughtful design. The interface is intuitive, setup is refreshingly straightforward, and the build quality feels rock-solid. It handles complex projects with ease while maintaining impressive accuracy, saving time without sacrificing results.
For creators, makers, and professionals alike, the xTool Metal Fab isn’t just a tool — it’s a serious upgrade to your workflow. Durable, versatile, and engineered for performance, it earns its place as a top-tier solution in modern metal fabrication.
Highly recommended for anyone who wants power, precision, and peace of mind in one machine.
Metal work has not been my background, but has always been a material I have been fascinated with, especially for crafting and small scale projects.
I was impressed at the packaging and organization of these machines through the shipment process. For the cost especially, it was clear that the pallets were designed for safe transit, and that everything arrived in top condition.
Set up was straightforward and easy to navigate with the included tools, documentation, and video support. The space saving features of the CNC especially impressed. While multiple hands were needed to help get the cnc into its final home, assembly was an easy solo project.
Working in Studio, the initial set up and calibration were a breeze and I was cutting the same afternoon all pieces were assembled in place. I have opted to primarily use the compressor and air dryer, and have achieved great, clean results so far. Material testing has been easy to set up to better dial in my settings.
I love the ability to "do it all" with this set up. Cutting flat stock has been great, but assembling and welding it has been a blast. I am largely a welding novice, but the included feeder and laser grip have made it easy to quick achieve clean and repeatable results. I have a lot to learn still and am excited to experiment down the road with the more advanced settings that will allow me to hone and deepen my skills.
This looks like a powerful all-in-one metal solution—perfect for small shops that need pro-level welding and cutting without a huge learning curve or multiple machines.
Important Note:
- *All product specifications and processing features displayed on this website are based on xTool's internal testing conducted under optimized conditions. Actual performance may vary depending on individual product differences, usage patterns, materials, environmental conditions, and other external factors.
- *Project photos and videos are for inspiration and to demonstrate creative potential; individual outcomes remain contingent upon user technique, material choice, and environmental factors.
- *Comparisons are based on publicly available information or internal testing under comparable conditions. Differences in testing methods, configurations, and environments may result in varying outcomes.