The World's Most Powerful 20W Diode Laser
10mm BassWood Cutting in One-PASS
8mm Black Acrylic Cutting in One-PASS
Easily and Precisely Adjust the Focus
Easy Focus Adjustment
Only take 3 steps to adjust the focus in 5 seconds. Pull down the original focus lever, slide the laser slider to make the focus lever close to the material's surface, recover the focus lever.
Precise Focus Adjustment
for Thicker Cutting
To ensure the cutting capacity of the laser, the focal length can be adjusted by lifting or lowering the laser module according to the thickness of the materials.
Precise Focus Adjustment
for Thicker Cutting
To ensure the cutting capacity of the laser, the focal length can be adjusted by lifting or lowering the laser module according to the thickness of the materials.
Genius Ideas from xTool Fans
Works great
Ghvf
I absolutely love the 20W Diode Laser Module for xTool D1 Pro. It works with no issues and give nice clean cuts. I went from the 5w t0 the 20w and I am glad I did.
We went from a 10W laser to the 20W laser and by almost every metric (speed, time, depth, and clarity) we had a convex payoff.
Coming from the 5 watt to the 20w I had to redo all the parameters and test grids and now other than cutting you don't always need 100% power and the feed rate can be raised quite high. Cutting 5mm plywood can be done in one pass but the cut finish is better with 2 faster passes, I did manage to cut 20mm solid pine in one pass. Also this head has enough power to engrave stainless steel in colours. Bottom line is buy the most power you can.