No Products in the Cart
*Compatible with xTool D1/D1 Pro Extension Kit.
Compatible with Machines of Different Sizes
For D1 / D1 Pro & other laser engraver
For Extended D1 / D1 Pro & other laser engraver
Upgraded to Max with Add-on
Remove the front piece, assemble with 4 Extension add-on, and then you get the Enclosure Max！
Foldable & Portable
Be able to engrave anywhere: inside & outside
Quickly assembly in 1 minute to upgrade
Safety Protection: Fireproof & more stable structure
Using the principle of airflow, fresh air is fed into the cover through the air inlet and then discharged outwards from the diagonally positioned exhaust fan.
*Increasing the ventilation efficiency by 200%.
Free Exhaust Fan & Pipe are offered.
17.9*9.8 inch, 455*250 mm viewing window, made of blue light filtering PC，Observing the machine operating in a safer way.
Isolating 99% of the dust particles, odors, and noise during the cutting and engraving process.
View Window * 2
Convenient to observe the whole process
Available for varieties of the open laser cutter
Large working space of 625*613*314mm (24.61*24.13*12.36 inch)Compatible with most open-engraving machines.
Compatible with 3 series of D1, 3 power ports for different height states of the machine.（The three side cable holes of the current enclosure are designed to be compatible with the 30mm risers. So when you are using our 45mm risers, the holes may not fit perfectly with the cables. This issue will be resolved in our new enclosure.）
Large working space of 1180*610*310mm (46.45*24*12.2 in)
Compatible with most Extended open-engraving machines.
for tool storage
Easy to open/close lidWill support the upper cover when it is halfway open
Screw steel wire with high expansion and bending, combined with double layer nylon cloth. The length is about 2.0m
|Size||625*610*310 mm (24.6*24*12.2 in)||1180*610*310mm (46.45*24*12.2 in)|
|View window size||455*250 mm（17.9*9.8 in）||Enclosure view window *2|
|Weight||3.4 kg||6.3 kg|
|Material||4mm honeycomb board material combined with 600D flame retardant polyester fabric||4mm honeycomb board material combined with 600D flame retardant polyester fabric|
|View window material||Blue light filtering PC||Blue light filtering PC|
This enclosure is great for keeping you work area free of smoke and most smells.
I don't use this for wood because honestly i love the smell of it burning but for anything that i have coated i put the enclosure over the machine to remove the fumes. I keep mine assembled under my worktable and so it is as easy as unplugging the wires and placing it over the Xtool. The fan is more than enough for pulling smoke and smells as long as you make sure that your exhaust hose doesn't sag. Keep it as horizontal as possible or place it vertically so that the smoke rising will assist the fan. This is a great addition to anyone wanting to keep their work area safer. It assembles and disassembles easily for storage or to take to vendor events. Would definitely recommend.
The xTool enclosure worked as advertised. I used some foam board insulation and cut a hole in it for the duct work and sized it to my window.
It was very easy to put the enclosure together and now I'm smoke free.
I have my laser in the basement in my husband's woodshop with an overhead fan but the smoke was still very bad. Bought the enclosure and boy has it really made a difference. I vent it outside through the window and I can see the smoke pour out on the other side of the window. Definitely cworth the money
This enclosure keeps smells and fumes from entering your home or workshop.
I thought abought making my own, but the ease of this one won me over. Assembly is easy, as well as modifying for different heights. Works well.