Yes, Manual mode is compatible with all our lasers: P2S, P2, S1, M1 Ultra, F1 Ultra, D1, D1 Pro, M1, and F1. And auto-mode is only compatible with P2S, S1, M1 Ultra, and F1 Ultra.

Syncing the AP2 with the engraving machine requires a Bluetooth dongle for information transmission. At present, only the S1, F1 Ultra, M1 Ultra, and P2S meet this requirement.

The diameter size that the product can adapt to is 3 inches，as long as the size of the smoke exhaust pipe of the laser machine meets the requirements.

Yes, exhaust air can be discharged directly into the room because our purified exhaust air meets the air quality requirements for direct indoor exhaust.

If you are an existing user of the site, you can purchase directly using the discount code "AP2BENEFIT". If you own an xTool machine but are not a registered user, you can fill out the form on the page to receive the discount.

If you are a new customer, you need to add both the machine and the purifier from the "Frequently Bought Together" section on the machine's product page to purchase the purifier for $499.

The P2 and P2S models need to turn off the fan of the laser machine when used with the purifier. The P2S will automatically turn off the fan when linked with the purifier.

Other laser machines do not need to have the fan turned off when used with the purifier.

It’s recommended to clean it every 6 months, but users can adjust this based on actual usage conditions.

Yes, it needs to be dried. A damp cyclone can affect the lifespan of the 3rd and 4th filters (the activated carbon layer and the carbon mesh layer).