xTool RA2 Pro for D1 Pro/D1 + Risers (8 Packs)

The Risers have give me more room to work with lots more material, while still keeping my machine stable.

My wife is surprised when she goes to the cabinet for a coffee cup, there are additional designs on the cups and glasses 😁 there is a learning curve but use label maker and make stickon notes to help 😉

I am very pleased with my D1 Pro and RA2 Pro rotary. The risers and the RA2 are very easily added to the D1 Pro. I did encounter some minor difficulty when I first used the RA2 but it was probably my using for the first time and finding conflicting information online. It was a problem with orientation of the RA2 which was easily figured out, however it seems a bit more info about the orientation of that tool would be appreciated by any further users. However with a little trial and error I got my tumbles engraved and was very pleased with the performance from the D1 Pro and RA2. I also inadvertently chose tapered tumblers which at the time I was unaware that the taper would require extra preparations to obtain graphics in proportion.( I found a useful formula online for skewing the image to obtain proper proportion on tapered surfaces, in which the changing diameter affects the size)

Everything works perfectly! I've only used it with lightburn though. The only thing I would recommend is coming up with a solution that doesnt require you to remove the risers when not being used. There are third parties that have 3D printed a slide to hold the bed/honeycomb and adjust the height of it

I'm have a hard time trying to get it to cut