No Products in the Cart
Pine wood is a natural raw material. Irregular shapes, stuttering, and deviations in color are normal. You can laser engrave your favorite pattern to make a personalized coaster.
It's a PVC film coated with self-adhesive on the back. It comes with a variety of colors, is waterproof and has no adhesive residue.
Instructions:
1. DesignDraw or trace the design.
2. CutPlace the shiny plastic side up on the cutting mat.Load the cutting mat into the machine and cut your design with a pointed blade.3. WeedRemove the workpiece from the cutting mat and remove the excess lettering film with a weeding tool.4. PastePeel off the pattern from the release paper, paste it to the desired position, smooth it evenly, and eliminate the bubbles to finish pasting.
Laser engraving
Device parameters | Speed | Power | Processing time |
---|---|---|---|
Laserbox | 50% | 80% | 1 |
D1 10W | 100mm/s | 85% | 1 |
D1 5W | 100mm/s | 60% | 1 |