No Products in the Cart
3s to register for $150 new member coupon and 2% payment back as an xTool member. Register>
Join Live: The World‘s First 40W Diode Laser Module Launch
1. Lucky Draw: FREE 40W Diode Laser
2. Buy Tool D1 Pro and get the $159 air assist set FREE!
3. Exclusive Discount: $400 OFF for 40W Diode Laser
Sign Up for More Suggestion and Deals
Adopted industrial grade structural design, the laser engraver xTool D1 Pro's processing accuracy reaches 0.01 mm incredibly. With 0.08*0.06mm ultra-fine compressed laser spot, xTool D1 Pro always shows the best details whether in engraving or cutting.
Smaller laser focus (from 0.15*0.15mm to 0.08*0.06mm) and tiny engraving line width makes for impeccable details, thanks to the compresssed-spot technology.
Higher Accuracy DIY Laser Engraving & Cutting Machine
By tightening the synchronous belt with the tension wheel adjuster, the all-steel wheels and shafts on xTool D1 Pro help reduce fractions and increases the laser engraving and cutting accuracy to 0.01mm. They last for 100,000 + times of sliding, triple the lifespan of plastic ones.
Engraving/cutting accuracy to reach 0.0004 inches
Repositioning accuracy down to less than 0.0007 inches.
Use innovative dual laser technology to combine two laser beams into one spot. The compressed spot has higher power, higher cutting ability, faster speed, and better effects under the same electric power. The power of 10W dual laser xTool D1 is equivalent to a single laser 15W laser engraving/cutting machine.
Get started quickly with our user-friendly software: XCS
Updating Project Files
Batch Processing with Circular Array
Default Working Parameters for Materials
xTool Creative Space
Compatible with mature engraving software: LightBurn
The layout, editing, and control software for common laser engraving machines. Engraving file format supports NC, BMP, JPG, PNG, DXF, etc.
LightBurn User Guide
Super powerful 20W laser beam oxidizes the metallic surface in an instant, bringing vivid colors to the engraved metal and making your laser engraver projects more vivid and colorful.
Easy Laser Focus Adjustment
It only take 3 steps to adjust the laser engraver focus in 5 seconds. Pull down the original focus lever, slide the laser slider to make the focus lever close to the material's surface, and recover the focus lever.
Limit switches will trigger the alarm if the moving laser head is about to hit the boundary of the machine rails in all directions.
The emergency stop will be triggered by the detection of flames, smoke and tipping, and the cutting and running will be immediately paused in case of further damage.
New Protective Design for Laser engraver
New structural design of the light shield prevents laser lenses polluting by smoke and reducing dust accumulations inside the shield.
Larger Engraving Area
A large working area of 430*390 mm ( 17*15.4 inch ), more than the size of A3 paper, allows you to engrave more patterns at once. Easy to use and more efficient.
Large Engraving Area
A large working area of 430*390 mm ( 17*15.4 inch ), more than the size of A3 paper, allows you to engrave more patterns at once. Easy to use and more efficient.
The Risers
Use additional risers (sold separately) to increase the height of xTool D1 Pro to facilitate the engraving of higher objects(use 2 sets to increase height to 140mm). Customize your skateboard or basketball to make them cooler.
Just Connect
You can transfer data via Wi-Fi, USB cable, a large capacity TF card (Offline Use) and use D1 Pro anytime and anywhere.
Just Connect
You can transfer data via Wi-Fi, USB cable, a large capacity TF card (Offline Use) and use D1 anytime and anywhere.
xTool RA2 Pro
Super versatile rotary compatible with most cylinders and spheres.
Air Assist
Get less burn mark during engraving and cutting
Extension kit
Expand your working area to 936*432mm
xTool enclosure
Foldable and protective enclosure for sale engraving
Limited-time 0% APR!
Pay monthly in 3 steps; no fees, no interest, no regrets. | affirm
1. Select affirm at checkout
2. Enter a few info.
3. Pay over time
Customize an e-gift card for friend or relative, record a video or write a text
message of your wishes, make sure they share your festive mood.
ALREADY HAVE A GIFT CARD? CHECK YOUR BALANCE >>
| Type | xTool D1 Pro-20W | xTool D1 Pro-10W |
|---|---|---|
| Machine Power | 120W | 60W |
| Laser Electric Power | 84W | 40W |
| Laser Module Output Power | 20W | 10W |
| Laser Spot | 0.08*0.10mm | 0.08*0.06 mm |
| Routing Speed | 400 mm/s | 400 mm/s |
| Working Area | 430 * 390 mm (16.93 * 15.35 inch) | 430*400 mm(16.93*15.75 inch) |
| Max. Workpiece Height | 50 mm (2 inch) | 50 mm (2 inch) |
| Max. Workpiece Height with X risers | 50mm+X*45mm（each set riser height column） | 50mm+X*45mm（each set riser height column） |
| Connecting Interfaces | USB/Wi-Fi/TF Card | USB/Wi-Fi/TF Card |
| Certification | FCC / FDA / CE | FCC / FDA / CE |
| Operating Systems | Windows/macOS | Windows/macOS |
| Control Software | xTool Creative Space / LightBurn | xTool Creative Space / LightBurn |
| File Type(s) | SVG/DXF/JPG/JPEG/PNG/BMP/TIF/CR2, etc. | SVG/DXF/JPG/JPEG/PNG/BMP/TIF/CR2, etc. |
| Compatible Accessories | RA2 Pro Air Assist Set xTool Smoke Purifier Honeycomb Working Panel Set Enclosure xToolCare for xTool D1 Pro 20W RA1 | RA2 Pro Air Assist Set Smoke Purifier Honeycomb Working Panel Set Enclosure xToolCare for xTool D1 Pro 10W RA1 |
FAQ
I’ve has smaller diode lasers and kicking the power up to 20W D1Pro has been game changing! I’ve been making endless cutting projects.
I have had tons of fun with my D1 Pro 10W. I have already started modding it with drag links, air assist, extended lifts, a camera and scissor jack for my honeycomb. Next up is an infrared module so I can get to metal and acrylics which was more my hope from the start.
Exciting product.. I bought the X-tool for my wife as a christmas gift but I havr ended up using it way more than her. It is a high quality laser cutter and make percise cuts and engraves like a pro. It is very easy to use and set up, this will help expand our offerings at our shop if I et my wife use it. I would recomend it to anyone looking to get a home laser cutter without spending a ton of money.
This has been a very fun laser to get to know and play with and I’m actually getting the hang of it pretty well
Stoked I bought this laser. easy to setup and the learning curve isn't bad. Thanks youtube!!! Great for many project!!!
