Aucun produit dans le chariot
Snapmaker is a tech company that makes portable desktop 3D printers. After the launch of Snapmaker Original in 2017, the company, as well as the product, became very popular after reaching the crowdfunding goal within 5 minutes on Kickstarter, just as xTool has done.
Due to instant crowdfunding, the company came into the limelight. Businessmen, enthusiasts, hobbyists, DIY experts, and professionals have tried the Snapmaker Original to see whether the product is worth it or not.
There were many issues with the Snapmaker Original, and then the company tried to improve the product. Users showed a lot of disappointment and shared their bad experiences. The initial product was not perfect and not worth the investment.
The company started to make the product better and solve all the problems. Snapmaker 2.0 was launched in May 2019. It was expected to be a better version that would work according to the expectations.
In this article, we have an in-depth look at Snapmaker 2.0. We will explore its advertised features, pros & cons, issues with the product, and everything a buyer should know. Based on our critical examination, we will share with our readers whether it is worth it or not or what they should consider as an alternative.
Let’s start the discussion without further delay.
Note: This section is for the readers who do not know what the Snapmaker 2.0 is and for what it is used.
Snapmaker 2.0 is a set of 3-in-1 3D printers. There are three different machines available in different sizes. The aim of the company was to create a multifunctional desktop 3D printer at a very reasonable cost so that people could easily afford it.
Snapmaker 2.0 has three functionalities, including 3D printing, laser cutting & engraving, and CNC carving. These three functionalities allow the user to turn imagination into reality. With this single machine, the user can make a wide range of products and items.
The machine is compact and multifunctional, and these features attract buyers. But the users still need to think a lot before they make a purchase. We are here to dive into the details to understand whether users should buy Snapmaker 2.0 or not.
Snapmaker 2.0 machines are equipped with many innovative features. The company has tried its best to bring a wide range of innovative features into a compact machine. These features are the most attractive gems for buyers. However, some of the features are still new and need a lot of improvement.
Let’s see what Snapmaker 2.0 has got.
Snapmaker 2.0 is a compact 3D printer for beginners. It enables hobbyists, designers, and engineers to make a perfect piece according to their requirements.
The printer has a built-in proximity sensor that does the calibration on its own, but the user also has the choice of manual calibration. It is an excellent option for users.
The problem with various 3D printing machines is that they stop if the filament runs out, and it is quite difficult to resume the process without errors and misprinting. But Snapmaker 2.0 has a sensor to detect the filament. It pauses the machine, and the user can easily resume the process after inserting new filaments. Most importantly, your work can be resumed after a power outage. It starts the process where it left off.
Snapmaker 2.0 machines have a laser module for laser cutting and engraving. There is a built-in camera to capture the object or material. The object is seen on the software, so it is easier to get an idea of the result and achieve maximum precision. The module also has an auto-focus feature that adjusts the focal point according to the material. There is no need to adjust and try the focal points.
Snapmaker 2.0 machines are also used for carving. Artists can carve their art pieces and do whatever they like. The spindle speed of the module can be adjusted, which makes it easier for the user to crave different types of materials. The CNC module has an ER11 Collet to ensure better concentricity and optimal precision.
Snapmaker has made a single software called Luban for 3D printing, carving, and laser engraving & cutting. It is open-source software responsible for all the tasks. It is specially made for the machine, and it can do the work of three software.
The machines have some interesting pros and fantastic aspects that attract the users. The company has put effort into making the machine of optimal quality.
Snapmaker 2.0 is compatible with a wide range of materials. For 3D printing, it supports ABS, PLA, PETG, TPU, and wood-filled PLA.
The compatible materials for CNC carving are acrylic, PCB, wood, jade, and carbon fiber.
Thus, users have a wide variety of compatible materials to choose from.
There is no question about the quality of the hardware. The machines are entirely made of metal. For better reliability, high-performance aluminum alloys are used. High-quality materials and components are used for the making of machines. The built quality is visible in the finishing and premium look.
Due to well-built hardware, the machine is expected to last for a long time. It is durable and reliable.
Snapmaker 2.0 is a set of modular machines. All these machines come with three types of modules that can be changed easily, like a camera lens. The modular design makes it a 3-in-1 machine and enables it to save cost.
The machines are very compact and ideal to be used at home for running a small business. It can be placed over a table. Most importantly, Snapmaker 2.0 is available in three sizes, so the user can select whatever he needs.
There are a few issues with the specialized software, and it needs improvements. The software has a few bugs.
Secondly, the software is a 3-in-1 software. With that being said, the interface is a bit cluttered, and there are many small windows. The UI looks a bit messy, and it is difficult to handle multiple windows and other cluttered functions. Beginners can easily get confused.
The software sometimes loses the connection with the machine, which is a significant problem. Your 3D project can be resumed after entering a new spool, but it does not always work.
The customer care is not very supportive. If you contact the support for an issue, most of the time, you get responses that are not going to solve the problem. Secondly, the replies from the company are late.
In the worst case, you might not get a reply to your email. You might get a few replies at first, but in the end, they will ignore your emails.
The Snapmaker 2.0 machines are noisy. Although they are compact, they produce a lot of noise. If you are thinking about using it in your house, you might need to shut the door or use some hearing protection. You might need a separate space for the machine; otherwise, it will create disturbance in your house.
Generally, such machines are very noisy. If you buy a laser engraver/cutter, CNC, or 3D printer, there will be some noise, but Snapmaker machines are a bit noisier in comparison.
We have already discussed that there is no machine on the market that can do all three things (engraving & cutting, CNC carving, and 3D printing) with perfection, which makes Snapmaker a unique product. If money is not an issue here, then Snapmaker is definitely the most versatile 3D printer you can get.
But if you are a beginner with a limited budget and just want to give laser engraving a try, there are more affordable alternatives.
xTool M1 is an excellent alternative to Snapmaker 2.0. It is also a one-of-a-kind machine because it is the world’s first hybrid laser and blade cutting machine. It is a 2-in-1 machine with a laser and blade head. Surprisingly, both these heads are included in a single module, so there is no need to change the module head.
xTool M1 is an ideal laser engraving and cutting machine and blade cutting machine. It does all these three jobs with utmost precision and high accuracy. Sometimes, laser beams are not suitable for cutting as they leave burn marks; therefore, xTool M1 has solved this problem by having a blade cutter.
The laser module of the machine is commendable. There are two types of diode laser modules available: 10W and 5W. There are two laser sources used in the 10W module, and the beams are converged at a very fine spot. FAC lens is used to make the spot smaller having dimensions of 0.08 x 0.08mm. The highly focused beams ensure optimal precision and accuracy in engraving and cutting.
Due to the use of dual laser technology, the output laser is quite powerful. It is capable of cutting an 8mm plywood board with only one pass at high speed.
There are tons of other features of xTool M1. The machine is equipped with a camera that helps you alight the object with perfection. You have a complete idea of the result and what the engraving will look like.
The AI Auto-focus makes laser cutting and engraving easier than ever. The machine detects the object and adjusts the focus to the optimal level. Beginners can also use the machine without any hassle.
Surprisingly, M1 from xTool can do batch processing. It means it can engrave multiple objects at a time, and this feature makes it ideal for small businesses. Furthermore, the machine has minimal noise, so it can be used at home without creating much noise pollution and disturbance.
xTool offers multiple attachments, such as rotary attachments for cylindrical objects. Moreover, the company has tested the laser on a wide range of materials, and there is a material testing report along with images. The best part is the customer service is more than satisfactory. Thus, it is an excellent alternative to Snapmaker 2.0.
The 3-in-1 Snapmaker 2.0 is a unique idea, but if you are thinking of buying a Snapmaker 2.0 machine, the price is your priority concern, especially if you are a beginner, when the budget is limited and the features you can try are limited as well. We have already discussed the features, pros & cons, and an alternative to Snapmaker 2.0. Now, you might have a better idea of the machines and whether you should buy them or not.
More questions? Join our Facebook Group to get inspired!