Compatible with Machines of Different Sizes
For D1 / D1 Pro & other laser engraver
For Extended D1 / D1 Pro & other laser engraver
Upgraded to Max with Add-on
Remove the front piece, assemble with 4 Extension add-on, and then you get the Enclosure Max！
Foldable & Portable
Be able to engrave anywhere: inside & outside
Quickly assembly in 1 minute to upgrade
Safety Protection: Fireproof & more stable structure
Using the principle of airflow, fresh air is fed into the cover through the air inlet and then discharged outwards from the diagonally positioned exhaust fan.
*Increasing the ventilation efficiency by 200%.
Free Exhaust Fan & Pipe are offered.
17.9*9.8 inch, 455*250 mm viewing window, made of blue light filtering PC，Observing the machine operating in a safer way.
Isolating 99% of the dust particles, odors, and noise during the cutting and engraving process.
View Window * 2
Convenient to observe the whole process
Available for varieties of the open laser cutter
Large working space of 625*613*314mm (24.61*24.13*12.36 inch)Compatible with most open-engraving machines.
Compatible with 3 series of D1, 3 power ports for different height states of the machine.（The three side cable holes of the current enclosure are designed to be compatible with the 30mm risers. So when you are using our 45mm risers, the holes may not fit perfectly with the cables. This issue will be resolved in our new enclosure.）
Large working space of 1180*610*310mm (46.45*24*12.2 in)
Compatible with most Extended open-engraving machines.
for tool storage
Easy to open/close lidWill support the upper cover when it is halfway open
Screw steel wire with high expansion and bending, combined with double layer nylon cloth. The length is about 2.0m
|Table header 0||Enclosure||Enclosure Max|
|Size||625*610*310 mm (24.6*24*12.2 in)||1180*610*310mm (46.45*24*12.2 in)|
|View window size||455*250 mm（17.9*9.8 in）||Enclosure view window *2|
|Weight||3.4 kg||6.3 kg|
|Material||4mm honeycomb board material combined with 600D flame retardant polyester fabric||4mm honeycomb board material combined with 600D flame retardant polyester fabric|
|View window material||Blue light filtering PC||Blue light filtering PC|
Simple to use and easy to assemble, could use more examples of test cutting on more wood types and dimensions. Great product for price. I own both a 5w and a 40w unit. Not sure the 40w lives up to specs. Still testing its capabilities. The enclosure add on works fine reducing smoke and dust, only takes minutes to assemble.
The enclosure is great and easy to set up. Really cuts down on the fumes and order in your work space. I have the extension set up with the riser legs. I added a 1x4 frame with little L brackets on the top to hold the cover in. This raised the cover up so it fits over the D1 pro with the risers attached.
The inclosure is a great product. my problem was that I have an ATEZR and it is about 6 inches to large. so I did a little modification by replacing the front an back panels with Plexi. then used a added supports on either side for the top to sit on.
It works Great and im more than satisfied with the product.
xTool Enclosure: foldable and smoke-proof cover for D1/D1 Pro and other laser engravers
I the enclosure as well as the air purifier. Both work as expected. I do like that I can use this in the house without the smoke and fumes.