As this was an Xtool Selected product and I was using it with my Xtool D1 Pro 20W laser, I felt pretty confident this would work well. First off, it arrived in a bubble wrap envelope inside a cardboard branded box. Each sheet is masked on front and back. With acrylic being so prone to scratches, I was really happy to see it so well-protected.

You get 3 12x12 sheets inside the package. The red is a bright red and glossy on both sides. Each sheet is 5mm thick. Previously, I had only tried 3mm acrylic and the 5mm feels much more substantial. This stuff is THICK.

For my first try, I used the Xtool Creative Space pre-programmed settings for 5mm red acrylic. Engraving comes out a nice frosted, lighter red color that is definitely easy to read for text. The suggested cut settings also worked well and popped right out (when I had the laser focused correctly), but there is a little melting on the bottom half of the cut (see photo). It's likely not an issue for most projects, but I may try lowering the focus a bit more and/or a few other tweaks to see if I can get it a little cleaner.

As with lasering all acrylics, you want to make sure you are venting the fumes properly.

For the amount and quality of the acrylic, I'd say this is a pretty good buy and I will definitely purchase more in colors that work with my diode laser.

The best acrylic is coming from the XTOOL Select store. It’s beautiful. It’s not warped. It’s not scratched up. Just lovely and cuts perfectly with my laser.

I plan on making ornaments with this, along with keychains. Acrylic cuts amazing on my laser. People love them as well.

Acrylic is exactly as expected. Glossy and scratch free. Comes with a protective coating on both sides that needs to be removed. I had zero issues cutting with my 10W diode laser

I purchased this to use with my laser. Good quality material, good thickness and a pretty blue color.

It came very well packaged, especially careful to avoid scuffing and marks which is easy to do with acrylic. Will buy again for any projects needing acrylic.

As this was an Xtool Selected product and I was using it with my Xtool D1 Pro 20W laser, I felt pretty confident this would work well. First off, it arrived in a bubble wrap envelope inside a cardboard branded box. Each sheet is masked on front and back. With acrylic being so prone to scratches, I was really happy to see it so well-protected.

You get 3 12x12 sheets inside the package. The red is a bright red and glossy on both sides. Each sheet is 5mm thick. Previously, I had only tried 3mm acrylic and the 5mm feels much more substantial. This stuff is THICK.

For my first try, I used the Xtool Creative Space pre-programmed settings for 5mm red acrylic. Engraving comes out a nice frosted, lighter red color that is definitely easy to read for text. The suggested cut settings also worked well and popped right out (when I had the laser focused correctly), but there is a little melting on the bottom half of the cut (see photo). It's likely not an issue for most projects, but I may try lowering the focus a bit more and/or a few other tweaks to see if I can get it a little cleaner.

As with lasering all acrylics, you want to make sure you are venting the fumes properly.

For the amount and quality of the acrylic, I'd say this is a pretty good buy and I will definitely purchase more in colors that work with my diode laser.